VPN

I have a setup where I have a default route to the internet for a VPN router. It connects to a base station VPN END Point through the Internet. I use ROUTE-MAPS to send packets from the LAN interface to the VPN with no problem. The situation I have n...

I am using the std 2.6.12_1398 kernel and am finding that I am unable to get reliable connections. After a reboot, the connection to the Cisco 3000 works fine. I have turned up the logging and but there is nothing obvious. After the last line, below...

Hi,Can I configure 1700 series router ( or any Cisco router ) to be VPN server for Windows XP clients. Secondly if on this router a multicast packet is received ( on Ethernet )can this router be configured to send this multicast packet to all VPN cli...

Hi All,We had our PIX 515e installed by a security expert. I'm new to PIX. We have several site to site VPN connections that work fine. We have 501s connecting to the HQ 515e thru dynamic and static IPs.My problem is I have the need to use MS VPN c...

I have an IPSec tunnel running between an ASA5510 and an ASA5520. Call setup works fine. When the phone goes off hook, only one side of the conversation can be heard. It does not matter what side of the tunnel you are on and it is intermittent beha...

Hi,Can router be configured to act as Remote VPN server for windows clients over internet , and can it be configured to transmit multi cast packets to VPN clients those are in the VPN pool with whom VPN server / router has formed secure tunnel.Thank...

We have a school district connected to our main facility/network via T1 that is attempting to connect using the SonicWall VPN client to an outside entity through our PIX Firewall. We have opened all ports (50, 500, 4500) that the company implementin...

Hi I have been struggling with a configuration problem for some time, and I am sure that I missing something simple, but at the moment is it beyond me. The issue is this. I have been given a Cisco 877W ADSL wireless router to use at home. I have the ...

I currently have a pix 501 behind a cable modem connected to my VPN 3080 via an L2L ipsec tunnel.When I try to bring up a second 501 behind a dsl connection or just on the outside of our network the 501 will go through phase one but not complete phas...

Does Cisco Pix support SSL VPN? If it, which IOS. ? And I’ve a query for ASA ….. I’ve gone through the ASA 5500 datasheet, Configuration guide and I found that it supports SSL VPN and is called WebVPN. But, somewhere in the documents says WebVPN does...

I have a well function IPSEC tunnel betwen to PIX 501. Now I need to route a secondary subnet trough the tunnel. In site A, I have IP address 10.10.10.0/24, site B 10.10.11.0/24 and behinde a router 192.168.1.0/24. It is possible?

I have got an IPSEC VPN setup between 2 PIX 501's. The PIX's have recipricol interesting traffic ACL's. Site A protects 3 subnets and Site B protects 1. All the tunnels come up ok and data passing is fine. However, there is one strange problem. Every...

IS there a command for ios routers like the pix command--- sysopt connection permit-ipsec---which will bypass the outside access-lists.

Hi all,Need some help from somebody with the same experience..I have configured site-to-site IPSEC VPN for Cisco router (central site) - Netopia DSL router (remote site).But I stuck on the IKE Phase I, it will not further to negotiate Phase II due to...

Dear vpn-professionals,since days i try to establish a connection to our PIX 501 easy VPN Server.I read several documents and all seems to be right, for example on the PIX side:..... startsysopt connection permit ipseccrypto ipsec transform-set XYZ e...