VPN

Have setup a site to site VPN's using a VPN concentrator and a PIX 506E. The tunnel establishes fine and stays up until it re-keys and which point it seems to fail to re-establish the connection. The only way to get the tunnel back up is to send traf...

Hello..My current scenario is as follows:INTRANET->(inside-private address) PIX1 (outside-private address)->Router1->INTRANET->(Inside-private address) PIX2 (outside-public address)-Perimeter Router A->INTERNET->Perimeter Router B->(outside-public ad...

Hi, There are two sites and multiple mobile users for accessing Central Office LAN Infrastructure.One site is India and other site is US.I had configured Site-to-Site VPN between India and US and it's working perfectly ok.There are some mobile users...

Hello everyone,we have 3 campuses connected together with non-dedicated site to site vpn's using pix 515 and one 501. we are changing isp's and i had a couple questions before i down the campuses.we have a vpn connection from our main campus to each...

Hi,My customer has a dial in requirement to connect his branch office to head office. If his Head Office 3845 has a WIC-2AM, can the branch 1721 with WIC-1T dial the Head Office router to establish a connection? Please clarify. Thanks.

who can help me about this message and plz explain what this mean ?and please help how to solve this problem. %SIGSM-1-NO_TEMPLATE_ERR: No static template found for slot 1 port 25 with parameters provided.thanks.Bahman mozaffari.

Pix to router vpn connectionWe created an ipsec vpn tunnel using preshared key between the router and pix box. The ipsec tunnel gets established, but only some of the traffic can flow if initiated by the PIX source networks. We have ten rules listed ...

topologyCVPN on winxp --> 1600 w/ NAT&DHCP --> internet <--> IOS VPN on 2600.I am able to est the tunnel over the NAT however I can not reach host or networks beyond or on the VPN router. here is my VPN config:username VPN_CLIENT password xxxxxaaa ne...

Has anyone succeded or has experience in installing the VPN-client from a Microsoft Software UPdate Service server ?

Does anyone try to configure DPD without problem??Is that the remote peer need to support the same feature and needs to enable it????I have open the debug command but nothing to see regarding the DPD message on the DPD enabled router.Please advise th...

I have a pix 515 configured for remote access vpn and it's working fine. I have a workstation connected to another subnet of the network. The workstation is using a vpn client software. When i connect this workstation to a Linksys router using the vp...

Hi,I'm trying to configure a GRE over IPSec tunnelbetween a vrf on a 6500 and a remote router. I'm confused over which interfaces to use for tunnel source/destination, and where to apply the crypto map. ThanksStuart