VPN

Hello,how can I configure a cisco Router for simultaneous ISDN DUN Dialin with the same Username and Password?I think this will work with virtual-template Profiles?Is this possible if I use also Dialer Profiles in the Router Configuration?Regards,Dir...

hi, i'll give u complete environment.we donot have a different subnet for vpn clients,we are using class c ip addres 192.168.0.50, this is Nat with a public ip address .Without vpn client we are able to browse and access lan through isa proxy server ...

HiWe have a CVPN3015 and we have tried to connected it to Zyxell Prestige 652 router with a IPSec LAN to LAN Tunnel.The connection data are:IPSEC Key mode: IKEIPSEC Protocol: ESPEncapsulation: TunnelEncryption Algorithm: DESAutherntication Algorithm...

I have a CISCO 1711 security router serving as a firewall to the Internet and as a VPN server for client connections. I am trying to troubleshoot a telnet problem and am having trouble with debug. Using a PC and the CISCO VPN client I make a connecti...

Hi,I am facing some problem when I apply IPsec on one of our circuit..1. I have 3600 router (flash:c3660-jk9s-mz_122-6a.bin) at my end and 2651XM ( flash:c2600-ik9s-mz.123-5b.bin) at other end. And I have 2Mpbs link with that site. Now when I ap...

I have two VPN 3030-NRs and planning to upgrade them to VPN 3060. CCO says that CVN3000-UKITB is required to upgrade. But I begin to suspect buying one or two Kits in order to provide more than 1500 tunnel sessions. If I buy two KitBs, does that mean...

I've got a customer that has multiple VPN's terminating on the 1721. They all work ok. Now they have to create a VPN to another site but this time, they have to us the vpn client on the desktop. The the vpn will terminate on a pix. I've tested th...

I have a 3640 router with a serial link and two backups. The first backup is ISDN and the second backup is PSTN. I have defined the static routes with administrative distance "200" for isdn and "250" for the PSTN backup. When the serial line goes do...

I have problem the MS-VPN client through PIX firewall.inside(MS-VPN client)--PIX--(public segment)--Internet--MS VPN serverPIX code 6.3(4) and configued as follows.fixup protocol pptp 1723sysopt connection permit-pptpaccess-list 100 permit ip any any...

hi,I am facing a ISDN configuration problem... My senario is as follow..1 ) I have one 2mb & one 64kbps links to one of my regional office.......2) My office should dial ISDN in such a way that only if both 2mb & 64kbps links r down then only ISDN s...

I would like configure PIX 501 has an L2TP over Ipsec for windows XP Client using Pre-Share Key

I am trying to set up reverse telnet so I can remotely manage some equipment. I am using the same config as I used on a 2511 access switch and I am having no success. since the MN-16 module is in slot 4 the lines are 238-273. I am trying to reverse t...

Hi,i need to upgrade my vpn concentrators (3005 and 3002), anyone knows the procedure? or a link where i could find outthanks