VPN

Hi,I am trying to connect to PIX firewall using Cisco VPN Client 4.0.3.When I try to connect it, after typing user name and password, itssays "Secure VPN connection is terminated locally by the clientReason 412: The remote peer is no longer respondin...

hi, i plan to do a vpn between two sites, to secure ftp between two ftp server, here is the configuration: access-list ftp-tunnel permit tcp host public @ host (your server ip) eq ftp isakmp enable outside sysopt connection permit-ipsec crypto ipsec ...

I have a number of L2L tunnels on my Concentrator. Some of them use the same IKE proposal, and others don't. When setting one up today, I received:Tunnel Rejected: IKE peer does not match remote peer as defined in L2L policy IKE peer address: *.*.*.*...

When we assign an IP Address to VPN Software Clients through VPN Concentrator, we can assign IP Address in the same range as the LAN interface of Concentrator. So when a host from Concentrator LAN network pings a remote VPN Client host, it would be ...

Hello,Does anyone know if IOS 12.3(10) supports the new WIC-4ESW (Cisco 1700 series)? I have some problems using this card with my current image and 12.3(10)T was recommended to me. However, this requires more RAM and Flash than I have on my router...

HiI am having trouble establishing a Terminal Service session between my remote branch computers and my head office server. Ping's are find and the VPN is active.the network setup is as follows:host-|branch router|--VPN--|Cisco1721|-serverhowever at ...

I can't get traffic through the router that my PIX is directly connected to. I'm using vpngroups with LOCAL authenication. I can successfully ping the 2611 router interface directly beneath my PIX, and I can also ping any device sharing the same su...

having problem mapping drives from network neighborhood when I vpn in. I can only map a drive using IP but cannot using UNC. also, how can I see my novell servers too. I am running Cisco pix 515E version 6.33 Please Help.

I have a scenerio where I have a Pix-520 at our our office and we have a machine on the internal interface of this pix that is running WhatsUp Gold. We have VPNs terminated from about 10 customers using Pix-501s to the central 520. We want to be ab...

Hi,I have absolutely no experience with Nortel VPN solutions. Has anyone ever setup a LANtoLAN VPN between a Nortel appliance and a Cisco Concentrator?Any documents out there?Thanks for all the help.

Hi All,I have a web sever(with NetBIOS name Web) on the DMZ, that outside users can reach on http://www.webserver.bm (@ outside IP 67.80.140.129). This works fine.What I am trying to acheive is to have inside users (@ network 10.0.0.0/24) to reach th...

Question.. my workcenter would like to set up a way to have our wireless/VPN users access IPTV content on our network. We will be using a VPNSM for the 6500 & will be implementing IPSec for encryption purposes. My research has concluded that IPsec do...

I am using 3005 VPN Concentrators and all MS Win2K clients. They have various versions of the VPN Clientinstalled ( 3.63 - 4.05 ). All our client using IBM Client Access 4.3 and above for a 5250 client connection to an AS/400 Host.On about a dozen or...

I have my PIX 515, outside interface has a private IP address. It is NATted to a public IP address at the internet router.If I am using PIX VPN client at the other end to contact PIX, will htere be any issue due to NAT ?