VPN

I want to utilize the RSA SecureID in the VPN 3030 solution. What I found is set to “SDI” in the IPSec authentication at VPN3030 concentrator. But I have no idea at VPN client.Any reference URL or information to implement this solution. I’m not famil...

Hello!I'm trying to configure the following for quite some time now but i cannot get it running.What i'm trying to do is- having a W2K / W-XP-Client in a local network with private IP (RFC1918)- having a DSL-router for the connection to the internet-...

We have cisco pix 515 with 6.2 ios. Everything was working fine till yesterday and suddenly vpn clients were not able to connect. When client connects it initialises and then in authenticating user it just stops for 10 minutes and gives remote peer n...

Hi all I am new to the PIX firerwall product, My LAN currently has a PIX firewall Model 501. I want to set up a Windows 2000 pro machine as VPN client to connect to a bussiness partner's VPN server(MS windows 2000 VPN server on Internet. Which vpn...

Hey all,I specify 2 ip address in the access list of the VPN concentrator. I then go to a third machine on the same network and am able to access the concentrator from that 3 and different ip address.what am i missingthnxmjb

Is there a way to have ipsec and isakmp debug messages sent to a syslog server? I've setup a syslog with Kiwi syslog, and even though syslog trapping is set to debug mode, I'm not seeing the results of debug ips, debug isa, and debug ca that one nor...

A colleague was at Networkers last Spring and heard in a presentation on VPNs that when using hardware encryption modules, you should use IPSec in Tunnel mode even if using GRE tunnels. The presenting engineer said you get better performance with tun...

I am currently experiencing an error on multiple VPN 3000´s that the vpn concentrator is loosing its mapping to the sdi port 5500. All VPN 3000´s are running the 3.6.x software version. This error is occurring inconsistently on multiple concentrators...

Will it be possible to establish multiple tunnels to two or more identical subnets ? Says I want to establish two tunnels to Site A and Site B, connecting to devices which unfortunately has similar private subnet eg. 10.10.10.0/24.Q1. Can multiple ...

I use cisco VPN dialer(3.5.2 Windows 2000 Professional) to connect back to my company VPN server through my clients' LAN's at different locations. At some client locations (mostly Healthcare organizations), I can not send email through Notes but IM/t...

I am in the process of configuring VPN access thru a 515e to a corporate LAN. I am running 6.2 on the PIX. I have used the VPN wizard to create entries for everything I think I am supposed to have. My question is between my PIX outside interface and ...

We configured a VPN server in a DMZ off PIX 515. The server has one NIC and we can ping outside clients and inside hosts including the DC and DNS servers. However the clients are still getting NO answer. My ACL is: access-list 100 permit gre any h...

Hi Folks, I tried to look around to see if this has been discussed before, but I didn't find anything. If it has, please accept my appologies ;-) I have a PIX to PIX VPN network currently running with around 50 501's and 506's which all terminate on ...

I've got a small network with a Cisco 2610 router at our Internet connection point (T-1) configured with the IOS Firewall software. I am using simple access lists to allow outside traffic in as well as inside traffic out. I deny all outside traffic...

Just a quick question to see if anyone has been able to make the "title" work. I have a VPN Concentrator running code 3.6.5. An IPaQ PocketPC running the latest movianVPN software. The IPaQ does authenticate when I use an internal user account. I ...