VPN

The PIX in central office A is using 10.1.1.0/24 with NAT global address 209.*.*.*(the pix outside IP address is also in this range) . It has three connections to branch office B, C, D.the pix in branch B is using 10.2.1.0, and the pix in branch C is...

We have a remote access network of AS5300 and Cisco 3640 with DMM at diffenent location and currently dialup users connect to the nearest AS5300 or Cisco 3640 using PSTN dialup connection.at the cost of local call. We would like to use encryption on ...

Has anyone seen this problem before?A user I support has DSL with verizon on a Win2k PC. Without the VPN client loaded the user has no problems connecting to the DSL and the Internet. After she installs the VPN client the PC will reboot when attempt...

I have an 506 Firewall with 6.2 software release that protect my Corporate LANI use an DSL access to Internet.I use VPDN and PPPOE to initiate the Internet connection. I will use the IPSEC functionnality to allow remote access to the Corporate LAN f...

The tunnel is up but I can not ping between 2 sites. I don't known why although I am using static routing

hiI have an ipsec tunnel setup between a cisco 2621 and a netscreen device. it seems to be working in that both sides can ping each other (haven't tried anything more adventureous than that just yet)but I am getting these messages in my logs on my lo...

Hello all,I wanted to ask a question which I thought one of you might know. My job is that of a tech support rep at a software company and although enough about topology to get me by, I'm not 100% certain how to explain this away with a specific tec...

We currently have a PIX 515 E (6.2) and 1710 (12.2) router for our company VPN solution.I do not think the equipment is performaning as it should be and am currently considering replacing with a concentrator.How do I check the cpu performance, memory...

Is there any way to configure the pix to limit the vpn users access some specific ports like telnet for example.Thanks,

Is it possible to use the Cisco 1710 as a EzVPN client when having multiple networks behind the 1710 router and still run it in EzVPN client mode?Want to run PAT as in client mode and don't want the central site to see the networks behind the 1710.T...

Hi all,I need to configure the VPN between a Pix firewall and a VPN client; can I configure authentication with a local user database? ThanksMarco

Please let me know, if it is possible to connect a Windows 2000 Professional VPN Client (in-build vpn support) to Cisco PIX 506E.Thanks,Amit Sonik

I have central site and 8 brunches and I need to create tunnel to them to exchange ip traffic only. It can be done in two ways1. create GRE tunnel and encript it by IPSec.2. Do not create GRE tunnel. Use only IPSEC.First approach has two advantages.a...

i have a few users using x windows and connectivity security pack (ssh telnet) and it is not working. anyone have any users experiencing the same problem?