VPN

I have PIX 515 and I have vpn connection to our branch office which has 525. All the vpn connection worked fine until now. Suddenly my connection to other part is very very slow. I can reach the other office server in 110ms through the internet (ext...

When I ping the other end of the VPN tunnel I get the followin message :-CRYPTO-4-IKMP_BAD_MESSAGE: IKE message from 217.155.33.44 failed its sanity check or is malformed....I am using a Cisco 803 with c800-k9osy6-mw.122-8.t5.bin, which is the only...

In the VPN Client (3.6) there is a parameter in the vpnclient.ini file called NetworkProxy=. It appears that this parameter will route HTTP requests to a proxy server. This would be handy in my environment, but I can not seem to get it to work. Has a...

Hi!I'm having somes problems with the MTU size regarding the VPN Client configuration. I believe Cisco recomends changing the VPN Client MTU size to 1400. That works fine with a dial-up connection but waht if i connect my PC to a LAN? Do i have to ch...

I would like setup an Easy VPN with PIX 515E (Easy VPN Server) with a fixed internet address and PIX 501 (Easy VPN Client) with private ip address linked to an ADSL router with dynamic internet address. I tried whitout success. Is possible to find a...

I having some funny problem here and hope someone could advise me.senario is like this. I have the Cisco 1720 with 3des IOS feature at the HQ and my branch is using the cisco 1721 with connected to the ISDN line with dynamiac IP address assigned. I o...

Just curious if anyone has had success connecting a PIX with a Watchguard Firebox II running OS 4.5 or higher? Are there any issues that are unique to such a scenario?I have two branch offices that are currently connected via Watchguards, however, o...

Hii am trying to telnet (preferebly ssh) into a pix firewall after logging into the network with a 3.51 vpn client without success. can u people giude methanks

Hi:I have a LAN environment with 2 different IP subnets (172.16.0.0/16 and 172.170.0.0/16). My IPSec tunnel is configured for 172.16.0.0 subnet. If a remote users connects to subnet 172.16.0.0/16 through IPSec tunnel they can not access the 172.17.0...

I am able to use my pix to assign ip address to vpn client with command isakmp client configuration address-pool local vpnclientIpPool outside orvpngroup XXX address pool XXX .But how do you use the ACS IP pool server? If you remove the previous comm...

Hi All,Got a curly one. I have a VPN based WAN with 827's and 801's at the remote sites (13 of em) with the 827's doing GRE tunneling over IPSEC via ADSL to a 2620XM. The 801's dial a 2620 with a PRI using dialer-watch if the ADSL goes down. Routing ...

PIX 520I have some windows 2000 and winXP clients using the 3.1.1 VPN client. they can always successfully establish a VPN connection but sometimes they get the message "the exchange server is unavailable". when they're connected to an ISDN or DSL ...

How would someone go about submitting a formal request with Cisco to make some chanes to the screens used to manage VPN accounts? It would really be nice if they could include a 'COMMENTS/NOTES' field that you could put some freeform text messages i...

I have a PIX 515 6.1(3) My problem is regarding a IPSEC VPN with IKE between my pix and the remote site router. The VPN uses shared keys.The issue I have is when the key lifetimes expire and the IKE key axchange is renegotiated.I lose the VPN connect...

SCENARIO: SOHO customer has a cable modem internet connection. They are using a PIX 501 behind the cable modem. They want the ability to VPN into PIX using VPN software client from anywhere on the internet. Pretty basic set up. I have tested this in...