VPN

 Hardware is ASA 5510, ASA 9.1 (7) 25 I have a user who connects to our network using anyconnect then RDP's to his machine to carry out out of hours tasks. Usually this works fine but for the last couple of days he has reported that he can connect us...

Hi, My problm :  -  I have a HUB configured with a transform-set mode tunnel  -  A spoke behind NAT device. how could i integrate the spoke into the dmvpn ?    # without changing the HUB configuration   

I was wondering if there is a way of getting a report of my history of VPN log ins- with time/ hrs used over the last month/months/ year? This is something I would like to find to show extra hours worked from home for discussion with managers etc. I ...

Hello Everyone! I'm attempting to configure SSLVPN without split tunneling. VPN network - 10.10.22.0/24 (10.10.22.5-250) is the pool. I'd like to tunnel ALL traffic, private or public, through the tunnel, allow users to access 10.10.20.0/24(Corp LAN)...

Hi everyone I'm having issues configuring a site to site VPN between ASA and Checkpoint device. At this point, we have check that interesting traffic, encryption and hashing algorithms are ok. When we originate traffic from the network attached to AS...

Dear colleagues,I'm trying to connect Cisco IOS device (800/15.6M or CSR1kv/XE16.12) to Strongswan using FlexVPN model. It connects and I see traffic (e.g. pings between Cisco and remote side) but Cisco (both mentioned above versions of software) gen...

Hi, i get the below remote desktop connection error message when trying to access the client desktop.Anyconnect status is connected.Could you please suggest how to fix this ?My teammates use the same application and are connected to RDP.  

Hi, I have a problm with my DMVPN architecture : - The HUBs are config with transform-set mode tunnel.- Spokes behinde NAT device.DMVPNHow can I fix this problem without changing the hub configuration? Thanks ! 

I have a site-to-site VPN between two RV340 routers. The VPN connects and is functional for all purposes.However, given time, generally the better part of a day, the service degrades. Users cannot access resource across the VPN. Ping does not work on...

HI friends We have Purchased HMA VPN for Proxy access. In HMA VPN support they have mentioned that HMA can be configured in dd-wrt supported Router. but in our company, we are using a Cisco 2900 series Router, so is there any possibility to configure...

I had to change the public ip address of our VPN anyconnect destination and updated DNS.  My Anyconnect client is still attempting to use the old ip address when I put the FQDN in the connection field.  I have tried to uninstall and installed a fresh...

HI, After users connect for the first time using IP, I assume their profile is downloaded and the box on Anyconnect where you input the IP of the ASA is changed to the FQDN.  This name will not resolve because it is not in any DNS except for my local...