Update - We have completed the relabeling project for the wireless board. We will be lifting read-only mode today the Sixth of May. Thank you all for your patience and feedback. We are approaching our latest step in relabelling posts across the Sma...
Forum Posts
Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant- Discover support content and options for your gearSupport page index - Contains a ...
Hi Team, I have above switch N9K-C9236C and my end NIC card has 200GB card i want to do the connectivity between Switch to server to using splitter cable 2port 100Gb + 100GB switch side and next hope will be my NIC it has 200GB So which QSFP Module a...
Is there anyone who can help me download the latest firmware for the WAP321? It should be 1.0.6.7. This AP is beyond end of life and I can't find this fw on the Cisco support site.
Hello,I've tried on my own for too long to figure this out so looking for assistance please...My home network has FTTB providing 100 Mbps down and 40 Mbps up. Clients associated to the WAP371 (FW 1.3.0.7, the latest), however, get 0.5Mbps down and pi...
i have 4 CBW 240 that have issue with broadcasting 5g radio
Thank you for any help.Brand New Small Business installing 150 AX. 3 total. Can location/radio interference cause an issue?I have one location that will not obtain IP address(red,green,off) I can change the units (use different Access Points), take...
Hi , I have Cisco wap361, recently it is sending lot of unusual traffic to firewall, basically this access point is sending traffic from 0.0.0.0 to multicaste IP , what is the reason behind this . We haven't done any changes recently.
I have existing AP which I configured with my old phone. Does anyone know how to reconnect with my new phone without factory resetting the APs?
I can’t seem to find any information about this in the forums or on YouTube. But I have 3 access points on my network in a mesh and I can’t seem to use the iphone app to view my network. I have the Cisco business dashboard enabled. I tried disabling...
Resolved! Error AP POWER
l getting error on ap is flashing red green and blue and my switch is cisco small business SF300-POE And no wifi this ap is covert to me newest version sill flashing red green blue
I have questions in cluster settings. (1) Number of WAP devices per single point setting WAP150:4 Does the setting 'WAP150:4' indicate that a maximum of 4 WAP devices can be connected in a single cluster? (2) Registering an AP in a Created Clu...
Hi, I have Mikrotik Cloud base router its connect with cbs 100 switch (WAN) and its connect with cbs350(LAN). I am getting this error. Kindly this one is from swx side or WAN side and what's the solution. Thanks @
Hi,I have tried to retrieve serial number info for 3 units of the Cisco WAP4410N Access Point devices via Web GUI and CLI, but it seems can't find the serial number info for this model. Kindly advise further, thanks.Regards,Wilson Leong
Resolved! configuration cisco 140 AC access point
Hello Team.I have a problem with the Cisco 140 AC access points that I am installing at a client's home. We have followed the configuration procedures:- we created an administrator account-I created a wireless network- I confirmed the settings- when ...
First off, I have to say I am EXTREMELY dissatisfied with Cisco's supposed support. I just bought this device and it is not connecting. I did the usual google searches and nothing helps. I watched the Tech Talk videos and followed the directions w...
Resolved! Multiple CBW Masters
Hi,Is it possible to have multiple CBW Masters on the same network? It appears that the MAC address used is static and hence two is an issue?Many thanksTom.