Wireless

multiple users are unable to connect to wifi network. Meraki dashboard shows authentication and association failures for the SSID in question. what could be the issue for 802.1x authentication with Radius?

nevermind! just saw teh solution, cant find a delete button to get rid of this topic   

mDNS profile can by applied on: 1) interfaces 2) interface groups 3) wlans 4) guest lans 5) local policies 6) selected AP (on selected AP there is mDNS snooping and VLAN mappings button) I understand this choice is mDNS AP feature So we have 6 choice...

Hi all Today I received my very first Meraki MR33 AP, after having used Cisco APs since the AP 1230 model. I have to say, I'm pleasantly surprised about the hardware quality of the Meraki and I think Cisco could learn/adapt a thing or two from Meraki...

Hi, my printer HP 9022e does not print from my iPhone when I am associated to AP 3500 to WLC 2504 with 8.5.182.0 running code. The reason might be this: (Cisco Controller) >show mdns service srv-not-received macAddr Service-Provider-Name Srv Query Se...

Hello!Just started my very first Network admin job and the first thing I'm diving into is complaints about WiFi performance.We have a bunch of Cisco Meraki MR33's serving a wide office area. The main complaints come from an area where users are packe...

Hello,Just started my first network admin job and need advise!  One thing I immediately notice here is that people often complain about WiFi coverage/speed/performance etc and it's difficult to pin down whats what.The main office is also currently go...

Dear all,My question is maybe a little bit newbie, but I would like to turn on Meraki roaming. In our office, we have many devices which support this feature BUT few devices which not...and I am not sure if the Meraki roaming will have a negative eff...

Hello,Will it be possible to authenticate users to my WiFi network using Azure AD?I currently have it configured to authenticate using Active Directory and it works fine.I have seen that it can be done through google, facebook, AD, etc., but I am int...

Hello,I have a wireless network with MERAKI model MR42, MR52 and MR56 equipment, I have different SSIDS, all with external DHCP, all the dhcp pools are created in my L3 switch, later I assign each vlan to each SSID depending on the department.I also ...

Guys I am trying to keep a track of the number of concurrent users connected to a Meraki AP and then to alert if there are too many.Using the v1 Meraki API I can get a count of sucessful connection attempts over a certain time period, but this could ...