Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hi all , My company has just implemented wireless QoS . Critical services has been applied as Platinum .Now , we need to test if the DSCP markings are per expectations or not . Like : DSCP "EF" and "AF" markings. I have been searching cisco docum...
Is it posssible to place AP's onto Prime maps, based on either a mapping table, or by using the "Planning mode" positioning (assuming you use the same AP names from planning through to implementation). The planning map has the relative placement on ...
So im running a virtual WLC with v8.2.121.0 and am currently testing if AP's can join. Since: http://www.cisco.com/c/en/us/support/docs/wireless/virtual-wireless-controller/113677-virtual-wlan-dg-00.html i upgraded the AP to c1140-k9w8-tar.153-3.JD...
Resolved! earmuff in block out noises
Hi All, We were told that in a busy Public Wifi signal environments , in order to block out interference from other APs, we could config our wifi AP to listen to its own signals only instead of others ie similiar to human wear a earmuffs to block o...
Hello I have bought a used Cisco AP 1100, with console port. I have downloaded putty to program in, but when i enter ENABLE, it ask for at password, witch i can´t type, have tried both with letters and numbers, i just can´t type anything in the comma...
We've been using a E1200 router for some years now. It is the only DHCP source on our Microsoft workgroup at the office. There is no domain. With increasing frequency when the half dozen PCs running W7 which are connected via Ethernet cables are ...
Hi several users cannot rejoin wireless network automatically once their devices drop off the network. I doubt if this is wireless network issue. Anyone knows if this could be wireless network issue? Thank you
We've been trying to filter the connect clients by SSID and we weren't able to see which users are connected to the said SSIDWe tried filtering by MAC address and we were able to see the user connected to the said SSID.We noticed that when we filter ...
How do you setup wireless connection on Cisco 8861? I have enable Wi-Fi using Cisco Call manager. I have turn on the wireless on the phone using Admin settings menu on the phone. I have my wireless on using a hotspot. The phone is not displaying list...
Hello, As part of a pre-requisite of potential project to deploy Teleworker AP's in remote locations I have configured a 2602 AP to be in OEAP mode for testing purposes. With anchoring setup the remote AP does successfully associate with the anchor...
Good evening everyone,Helping a friend with a wired wireless issue. He is fighting users loosing their ip address's on all wireless connections once every 30 mins. you reboot the access points and they can reconnect and will be good for 30 mins again...
Hello Experts, I need to run Cisco Prime over VM. Need to comprehend: a) Part number to be considered in CCW. b) The support part number that should be added. For the Prime running over VM, I believe the support involved covers only the TAC cases....
hello everyone i would like to backup or export dabase from CMX how i do it ? thanks
Hi , We have flexconnect AP with local switching. I would like to set up as in the pic. flex connect AVC profile controls/limits some applications. and the QOS-role is limiting traffic rate specific to the user roles (like guest,byod). My understand...
Why does the WLC lets you set to custom the channels and also turned on clean air technology?. I thought clean air will dynamically change the channels of the AP. or can you still have or set your channels to auto and have clean air on? Thanks in adv...
