Hi All- I am moving APs from my 5520 (8.10.183.0) to a new 9800-CL (17.3.6) controller. Two questions:1. Can I see the primary / backup software versions on the AP when it is registered to the 9800. I can't seemed to find it.2. Is there a way to pr...
We are installing a few MR86's with 2 x MA-ANT-25s for pallet racking coverage. I'm aware the MR76's (which we've used before) have specific 2.4 and 5GHz ports on them but the MR86 doesn't.Does this mean w could connect one antenna to the top and bot...
I have C5508 controller with code 8.3.150.0 hosting ~280 APs with different models ( LAP1142N, AP1832I, CAP1702I etc) and yesterday for unknown reason several APs were missing ( de-associated ) from WLC. no TAC support and no time, reloaded the WLC a...
Hello everyone, wanted to know if the self-identifying feature only is not supported in AirOS or it will completely not work with AirOS and will only be functional in IOS-XE as cisco document says (The Self Identifying Antenna model ANT2566D4M-RS= is...
Hello everyone.I am currently using WLC5520-8.10.196 and AP9115AXI in the office. I have noticed that some clients occasionally roam to farther APs. These clients are all Intel's WIFI6 network cards. The frequency band of AP is 80MHz.The AP3800 serie...
I am trying to work out what the above device is, it was connected once and sent 1KB of traffic. The port is was reportedly connect to has an internal WAP connected to it which isn't accessible without a ladder.The SSID associated with the VLAN the c...
We have a 9800-CL Wireless Controller running 17.12.2. We just got a new CW9164I-ROW AP and its registered by the operational interfaces are down due to a regulatory domain error. Is there a way to change the regulatory domain for the access point?...
Upgrading a network with CW9166I APs in can lead to them needing to be replaced.
Have an issue with MX67s rebooting like clock work every couple of hours, causing 10-12 minutes of downtime.Site 1 - Multiple factory resets, upgrades/downgrades, even did a RMA and still had the same issue. Was told to bring it home and wire it up t...
Is there documentation I can download explaining how Meraki synchronizes time across a network? I need this for PCI.
Cisco 5508 WLC v.8.5.161.0 doesn´t work via GUI but does work via SSH. It used to work and then it stopped working. The web mode option is enabled. Any help or a similar case?
Hi,I have one 1852E in mobility express mode and I having problem with him.When I want to configure him and I connecting to him using console cable (Putty with configuration: 8,1, none,none) he stacking on boot Reseting him using mode button not work...
Good evening to you all,if I give folks a brief rundown of my equipment then I hope this might shed light on my woeful speeds.equipment:Cisco 2504WLC with 75 licenses, Cisco c2960cx-8PC-L, Cisco c2960c-8PC-L, Cisco c2960c-12PC-L, Cisco aircap 3602I w...
So we have old 5508 controllers in our environment which has access points and clients on them. We also have 9800 WLC in our environment on the same switches. We are planning to move the access points and clients between the two controllers and wante...
wireless clients can be connected to the WGB SSID ? Or any other way to connect the wireless clients without additional ap
