Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
We have some 1131 lightweight access points which were once registered with a controller which is no longer available. When we issue the command "clear lwapp private-config" The message "ERROR!!! Command is disabled."This error message indicates tha...
Hello,we have a WLC 4404, Software Version 4.2.61.0 and the following Problem.The WLC worked for many years with the SSID "SKHGR". In addition to the existing SSID I have a second SSID "SKHGR-M" is created. The configuration of the two SSID's is iden...
hi,can you guys please tell me if the two ap´s mentioned above can work together in repeater mode?had a look in the manuals of both and saw that on the wap4410n you have to enable the repeater mode and enter the mac of the opposed ap.but on the ap541...
Hi, I have a question. I have WLC 4404. In local office it works fine. Now I want to add remote AP's to controler. I can't use HREAP because AP's dont support it. Remote office starts with RTR.My idea is: to create VLAN 19 on rtr, make a small dhcp p...
In this Router SettingsFirewall>Internet Access Policy Options are Greyed out.I can put the policy name , Staus, Days & hours.But i couldnot add the Forbidden Domains or Blcked URLsIt conmpletely Greyed out.What to do..?Please Help.Regards,Vijay Kad...
Hi, I'm trying to get a new 2504 WLC working with a AIR-LAP1142N-E-K9. I'm a newbee to Cisco WLC's so right now I'm just labbing with a simple setup but am unable to get the AP to recieve an IP address from the WLC.I've configured port 0 as the manag...
hi, I have an issue with iphone where if there are two SSID's from same WLC/AP and if i am connected to one and i try connecting to other, iphone shows unable to connect (whereas the debugs in WLC showing it getting connected and getting an IP ! ) ....
I have an cisco AP 1242, with only one SSID. On that SSID I have 20 Laptops. If I create a new SSID, and move 10 of that 20 laptops in the new SSID could be better?Regards.
Hi All, I'm having issues opening up http interface for the wlan on a Cisco 1941W. All I want to achieve with this set up is one SSID being broadcast that allows mobile devices access to the LAN. A lot of the SSID/Wireless set up has been removed due...
Hi.It´s true that there is a tool to upgrade the configuration from cisco PIX to Cisco ASA?And where I can found it?Regards.
The Cisco WLC it´s able to handle aps of differents brands?
I need to authenticate my wireless network with Cisco Secure ACS 4.2 for the internet users (guest network), but I don't want to use a CA Certificate. Can I do that? How I have to do it? What authentication protocol I must use? Where can I find this ...
Hi,I came across with one issue repetitively. Whenever we have issue with WAN disconnection issue, after some time our LAN WLC gets rebooted . As I gone through the logs, found that we will have disconnection with Mobility group member <ip address> ....
Hi everyone!Question is simple, but I cannot find it in google.Does WLC 5508 support AIR-LAP1042N?Reagrds,Aleksei
Just curious, when using the WLC Config Analyzer, one of the report items says "CDH Per WLAN" either enabled or disabled, what is is this?Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 12-12-2025 11:19 AM | ||
| 12-09-2025 06:25 PM | ||
| 12-08-2025 01:34 PM | ||
| 12-07-2025 01:43 PM | ||
| 11-13-2025 02:28 AM |
| User | Count |
|---|---|
| 7 | |
| 2 | |
| 2 | |
| 2 | |
| 1 |