Wireless

I try to follow http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtmlon Cisco Aironet 1140.But boot proccess does not interrupt whether I press ESC once or twice while I start to see loading of softwar...

                   Hey i have aan air cap 1552 e AP that i want to serve clients of laptops n PDAs but then the access point comes in bridge mode, Can i use it or it can only connect to other wireless access points?

Although I have the 1mb data rate disabled on the controller I still see lots of 1mb traffic while performing a packet capture. How and why is this occurringThanksTom

Two facilites are connected via wireless bridge(AIR-BR1410A-E-K9).we wanted to add wireless bridge at each facility to increase the bandwidth.So we will have two wireless bridge at each facility connected wirelessly.and we wanted to achieve it by doi...

I would like to set a time limit for how long a client can be continously connected to the WLAN that provides my guest internet access. The user name/password is hosted on my ACS and authentication is provided by my Cisco NAC. I am using 5508 control...

Hi there,i've one of my 3500 that when finish to download the os, the front led stop working.During the power on and all the test the led is flashing in various colors pretty ipnotizing When it bacame operative, the led stops.If i issue the test led ...

AIR-AP1230B-A-K9AIR-AP1231G-A-K9

Hi, we have a 2504 WLC and 8 352l AP. All AP are working and can be seen in the WLC except 1. It can grab an ip address but cannot see on the WLC. the show ap join...only shows that it is trying to join but no error indicated. A debug capwap events d...

Hi,I have a guest network and lately I have been experiencing troubles with some users.The symptom, as I create a username and password and type'em in a laptop the authentication fields in the web authentication page don't keep the data as if I didn'...

I am tryign to join my first AP to the 5508 and am gettign this error int he logs.*Dec 07 10:42:31.067: %DTL-3-NPUARP_ADD_FAILED: dtl_arp.c:2280 Unable to add an ARP entry for 0:0.0.0 to the network processor. entry does not existThe management Inter...

We have some rolling carts used for telemedicine and are currently using Linksys WET610N wireless bridges.  I haven't been very impressed with them - I have to reboot them at least once a week and figure it's a roaming issue.  Since they are a reside...

Hi,I'm trying to setup a work group bridge between Cisco AP (AP1242AG) and Aruba Wireless LAN controller (MMC3200) with AP105 AP's. I'm running IOS version  c1240-k9w7-mx.124-10b.JDA3 on the Cisco AP and it this IOS support workgroup-bridge universal...