Wireless

Hi Team,I'm troubleshooting a DHCP issue between a 3500 and a 5508.During the investigations we discovered two error messages one on the controller and the one on the AP.I could not find this error on any of the doco and if someone could elaborate on...

Does anyone know if there's a bug in the code for management over wireless in 7.2.110.0?  I have it enabled, but cannot connect to it.  When I do a port scan and see ftp and http open - https does not respond.  It should be the other way around, with...

Does anyone have experience with setting up the following scenerio?  We have an ACS 5.1 server that we would like to use RSAsecure ID tokens with.  Followed the config guide but still cant get it working. Any methodology to test if the two are even c...

Hi, I am all new to this. I have a stand alone 1140 AP and i am trying to perform a site survey using the AP; However I dont know what configs need to be on the AP for the survey ? can you help me please?

guyswhat's the major difference between the regulator domains for access points?http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a_ps10981_Products_Data_Sheet.htmlFor eg: if I use a N domain access po...

                   Is it possible to assign a manual DHCP entry on the internal DHCP of a WLC ? I would like to enable wireless printing and avoid having to hardcode the IP address of the wireless print server.

1. Does the Aironet 1242G have an internal antenna?2. When connecting an AIR-ANT1728 omnidirectional to the primary connector on the ap, does this have to be enable or is it enable by default?3. My laptops can connect and travel between access point ...

AIR-ANT2524V4C-R=Is this a directional Patch or a Omni patchCisco's tech spec pdf on this antenna says its Cisco Aironet Four-Element, MIMO, Dual-BandCeiling Mount Omnidirectional Antenna(AIR-ANT2524V4C-R)with no beamwidth stats Cisco's N antenna por...

Hi EveryoneWe have a problem.... well... many of them with a 7921G wifi phones. One of them is They are some users inside of pick up groups (all of them with 7921 phones). These pick up groups have configured with sound and visual alerts after 12 sec...

HelloCan you please give me enlightment. I have this conclusion:In WLC there are static and dynamic interface right?Static are (Virtual Interface, Management Interface and AP manager)and dynamic are (dynamic interface for Wireless VLAN and dynamic AP...

We did wireless coverage testing using some 1142 units in autonomous mode, and got a satisfactory result, but upon converting these test units to Lightweight and adding them to our WLC5508 controller, the coverage has decreased noticably.  Does anyon...