Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Hello,I want to configure a WLAN associated with a vlan behind a firewall.do I have to open any port to let the wlc work?I have management interface and ap manager interface in inside LAN, i have a protected WLAN in inside LAN and I want to configure...
Hello, Can anyone give any advice regarding Windows laptops that do not roam from one AP to another on the same 4400 controller? Particularly using an Atheros chipset - works fine under Linux... It's a WPA2/AES enterprise network on a controller runn...
Hi,we are using WLC and WCS. currently LWAPP is in channel 1, we've to change it to channel 6. how do I change it?Thanks.
Hi all,Could someone kindly confirm whether we could implement WPA2/AES, 802.1x (EAP-TLS) with CCKM for voice pls?The 7921g deployment guide imply that this could be done.It states that "As of the 1.3(4) release, the Cisco Unified Wireless IP Phone...
HiI have just made a setup with a couple of 2504 controllers and varius accespoints (LAP1142, LAP1252)There are an open "guest" ssid with some external web authentication.One of the users have an iphone, if he is near a LAP1142 he are having troble c...
I need to increase the AP license for the WCS. As I review the process, it looks pretty simply. However, after uploading the license it says to reboot the WCS. I don't see any menu selection on the WCS to reboot it. I could always perform a har...
Is there a way to authenticate a user logging into (telnet/ssh) a lightweight AP using RADIUS or TACACS+? I know you can set global usernames and passwords, but this customer would like to use ACS to authenticate user access to log into their APs.
All, I'm having issues streaming over my wireless network. I have a need to stream some video over my wireless network from my QNAP Storage array running Twonky to a PS3. The setup is this (all on the same subnet)QNAP NAS --rj45-- switch --rj45-- W...
Hello,My boss came to me today asking me why one of the phones he was using went into "Leaving Service Area". He basically had to reboot the phone.Our infrastructure consists of over 1100 AP's. These AP's are spread over 3 WLC 5508's running 7.0.22...
I have a lwapp 1130 here and it's no longer associated with the controller. I issued the clear lwapp private-config, it went through and cleared the config. Now when I try to issue the lwapp commands to set the ip and such i get ERROR!!! Command is...
Hi ; I tried PEAP machine and user authentication together with acs 5.3. But if we are selecting only computer authentication in the client side , we are able to connect without even prompting for the username and password.Is there any way to enfo...
I have 2 WLC (5508), i configured the option for enable the high availability, but when the 2 WLC is working the mesh network is unstable, when only wlc is working the mesh is fine.
Does anyone knows how to setup a Cisco 1252 (or similar) with six omnidirectional antennas?I want to install three 15dBi antennas for the 2.4GHz radio and three 10dBi for the 5GHz.Is this configuration ok? It's not too much for the ap?Thanks in advan...
Can anyone please tell me how to configure Cisco 1252-AG-A-K9 Access Point Root and Repeater?Thanks,
I run Cisco WCS 6.0 on Linux. Does it support x86_64 or do I have to use 32 bit?
