what is the recommended height ground to install the access point 1252 with external antenna? (Three 2.4-GHz 2.2 dBi and Three 5-GHz - omnidirecional)thanks and best regads,Murilo
what is the recommended height ground to install the access point 1252 with external antenna? (Three 2.4-GHz 2.2 dBi and Three 5-GHz - omnidirecional)thanks and best regads,Murilo
Can anyone tell me how much bandwidthCAPWAP requires per WAP-3502 acrossthe WAN to a WLC-5508 ?I am using a wan analyzer and it appears that each of my WAP is consuming roughly 30kbs of WAN bandwidth back to the WLC at my location.That seems a bit hi...
I am trying to understand how the load balancing threshold is calculated but I am finding conflicting information, even withing Cisco's own documentation. I would be grateful if anyone could help.Cisco's latest Wireless LAN Controller Configuration G...
Is it safe to upgrade a WLC4402 from 4.2.207.0 directly to 7.0.116.0? Are there any caveats? Thanks!
I have a 2112 wlc with 1130 LWAP's.I wish to use the wlc's internal dhcp server to give out ip addresses from the pool to both local clients and h-reap clients.Once the ip address has been assigned I want the h-reap clients to switch locally to their...
Dear all,i have the latest version of wcs 7.0 for monitoring and managmetn of around 77 APsi have there one problem in wcs maps some access points showing grey colour when i reboot them or shutdown or agian noshut the switch ports its become fine but...
I have a question how many SSIDs can put on a bridge
Hola a todosEstoy actualizando una controladora 2106 de version 4.0.217 hacia 5 y sin importar que version intermedia use 4.1 o 4.2 hay un error "Failure while storing in flash" alguna idea cual pueda ser el problema?Gracias......
I would like to use web authentication with wpa-psk/wpa2-psk. How do I configure login.html to use that?Anne
Have Aironet 340AIR-BSE-342 is security other than WEP possible?I can only figure out how to set WEP, there is no mention of WPA or any other security configuration.I am setting it up in access point mode
Is it possible to configure the DMZ auto anchor controller to respond with an DHCP offer with respect to the AP-Group of the foreign controller the DHCP request comes from ?We like to use the same ssid for the guest access feature at different sites...
Hi to all,i want to use local-eap+LDAP (microsoft AD) and i'm experiencing some issue.First of all i'm not able to bind WLC and LDAP...if a perform a debug aaa ldap enable i get this output:Any idea about how to solve this issue?RegardsAle
HiI am using Cisco 4402 WLC . I want to create a SSID in this controller which is only broadcasted during the day that is between the time 9.am to 6 .pm is there any way we can achieve this. I am also using WCS to manage the controller and the versio...
I have a simple scnerioPC --- AP --- ModemWhen I ping from PC to AP i can do it easily , but when I ping from PC to Modem or internet it says Destination host unreachablePC IP 10.2.2.222AP ip 10.2.2.241Modem IP 10.2.2.1 ( Routed Mode Connecting t...
Has anyone seen this error before?DOT11-3-TX_PWR_OUT_OF_RANGE: Interface Dot11Radio0 Radio transmit power out of range1410 Bridge ... Cisco documentation simply states "Remove unit from netowrk" ....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-17-2026 11:43 AM | ||
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM |
| User | Count |
|---|---|
| 4 | |
| 3 | |
| 1 | |
| 1 | |
| 1 |