Wireless

I need to configure EAP-FAST without certificate and authenticate to the corporate Microsoft AD database, Do I need a Cisco ACS server in the middle to forward the authentication to the AD? Or I can do the authentication to the AD directly? I am usin...

I currently have a WLC 2125 located at my HQ and 4 LWAP-1131G AP's configured in H-reap modes in 4 respective branch offices connected to my HQ controller.The issue is all 4 branch office AP's need to be restarted everyday in the morning for the clie...

Hi,If I setup an 1131 Cisco access point with WPA2 does that encrypt just the authentication portion for access, or does each packet going forward, once successfully authenticated, get encrypted also?Thanks,William

what is the recommended height ground to install the access point 1252 with external antenna? (Three 2.4-GHz 2.2 dBi and Three 5-GHz - omnidirecional)thanks and best regads,Murilo

Can anyone tell me how much bandwidthCAPWAP requires per WAP-3502 acrossthe WAN to a WLC-5508 ?I am using a wan analyzer and it appears that each of my WAP is consuming roughly 30kbs of WAN bandwidth back to the WLC at my location.That seems a bit hi...

I am trying to understand how the load balancing threshold is calculated but I am finding conflicting information, even withing Cisco's own documentation. I would be grateful if anyone could help.Cisco's latest Wireless LAN Controller Configuration G...

   Is it safe to upgrade a WLC4402 from 4.2.207.0 directly to 7.0.116.0?  Are there any caveats? Thanks!

I have a 2112 wlc with 1130 LWAP's.I wish to use the wlc's internal dhcp server to give out ip addresses from the pool to both local clients and h-reap clients.Once the ip address has been assigned I want the h-reap clients to switch locally to their...

Dear all,i have the latest version of wcs 7.0 for monitoring and managmetn of around 77 APsi have there one problem in wcs maps some access points showing grey colour when i reboot them or shutdown or agian noshut the switch ports its become fine but...

I have a question how many SSIDs can put on a bridge

Hola  a todosEstoy actualizando una controladora 2106 de version 4.0.217 hacia 5 y sin importar que version intermedia use 4.1 o 4.2 hay un error "Failure while storing in flash" alguna idea cual pueda ser el problema?Gracias......

I would like to use web authentication with wpa-psk/wpa2-psk. How do I configure login.html to use that?Anne

Have Aironet 340AIR-BSE-342 is security other than WEP possible?I can only figure out how to set WEP, there is no mention of WPA or any other security configuration.I am setting it up in access point mode

Is it possible to configure the DMZ auto anchor controller to respond with an DHCP offer with respect to the AP-Group of the foreign controller the DHCP request comes from ?We like to use the same  ssid for the guest access feature at different sites...

Hi to all,i want to use local-eap+LDAP (microsoft AD) and i'm experiencing some issue.First of all i'm not able to bind WLC and LDAP...if a perform a debug aaa ldap enable i get this output:Any idea about how to solve this issue?RegardsAle