Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
I just started a project to make a guest wireless network available at every site in my enterprise. Guest wireless networks are currently available at some sites. Two key goals of this project is to enable WPA/WPA2 encryption and to develop a web b...
Hi,What is different betwwen WLAPP mode & Autonomous mode ?RegardsKumar
Hi Folkson the WCS, i've seen Roam Reason is Unspecified,what this errors mean?Attached a pic,please Have a look to it
Hi,I have some issues with a wireless end device and wlan roaming.There are 5 different wireless clients where the roaming works great, but with one Windows Mobile 6.5 devices I have some trouble.The device uses a static IP-address.I created a mirror...
Dear All,I need some help to choose the right part number code for the two LAP access point in object.Both the LAP will be installed in Maroc North Africa.Could you help me pls?Best Regards,Igor.
This Option "Enable Controller management to be accessible from wireless clients" in the WLC doesn't work. When I uncheck this option the wireless clients can open the manament of the WLC.Somebody knows why this option doesn't work?
Hello-Appreciate your assistance with the selection of antenna for AIR-AP1252AG-E-K9.It will be installed in a big warehouse: 50 meters in length, 20 meters in width and 5 meters in height. I doubt we can mount it on ceiling, but on the wall only. ...
Hello, I have little experience in wireless and I work for a company that wants to build a wireless solution, up to 10 APs. This solution is also to serve laptops, smartphones and tablet's. Our switching is Cisco, but one supplier said that we would ...
Is there a way, in the controller, to fix a client to a specific AP? So, the client always associates with the same AP? Or must this be done at the client side? The Windows client doesn't seem to have the option.Thanks, Pat.
Hi guys,I am having a question about switchport QoS configuration for WLC. In the "enterprise mobility deployment guide 4.1", it says we can use both either "mls qos trust cos" or "mls qos trust dscp", depending on the mapping, however looking throug...
Hi,I'm having a strange problem in the office with one of my Aeronet C1240 access points.My current topology is a hub-and-spoke with my HQ which contains 2 Cisco wireless LAN controllers with version 6 OS. I have 10 AP's, 2 of which are in the HQ bui...
Hi, all.Is it possible to change the "SSID" of a configured wlan profile on the cisco wism ??I have configured a wlan profile with SSID "Temp" for temporary internet access and tied it to a specific campus location (building/floor) and interfaces via...
Hi All, I have a LAP-1131AG which I need to convert to an IOS based AP. Can you please tell me the procedure or tool which would help me with this?Appreciate your help.RegardsMikey
HiDoes anyone have a sample config for standalone Cisco AP1252 (Cisco IOS) for AD Authentication for wireless ?Appreciated your kind reply.
I have a problem with my link bridge point to point..same time the link go down for this link pass trafic of voice and data, maybe the link it s full for that reazon goes down .. I want to konw wich coul be the problem and if there is same tool that ...
