Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Hi,Quick question. WCS is currently auditing three WLCs (4400). We are trying to add a new WLC (same model and version) to the WCSand its reachable (but gives the error audit status not available).SNMP is configured correctly on both sides, there's I...
I'm going to install a Cisco Aironet 1310 with AIR-ANT2506 external antennas, someone will have the best practices for the installation of these antennas, considering that they will be installed on metal beams. Do I Need to install two antennas or ju...
hi,which is the ios image for LWAPP 1242ag series?
HiWe have a WLC4402management interface IP is192.168.0.10 on the192.168.0.0/24 network. VLAN 105Dynamic interface 10.31.0.4 on the 10.31.0.0/24 network for wired en wifi users VLAN 101 SSIDV101another vlan (106) where RADIUS and other server are.(not...
hi,how can i load new ios image to cisco 1242ag series ap which is lwapp.i want to load the same ios image as before.
I have a WAP4410N access Point, firmware 2.0.1.0. I have configured a Kiwi syslog server to get the log from the WAP4410N, but the log information obtained is just the "standard event log" and not the detailed log (every connection source and destina...
Hi,i want to configure my cisco 1242ag series ap(autonomous) to work as internet gateway.how can i connect it to network so that it will work as internet gateway for users.
Hi All,I would like to replace a AIR-WLC4402-25-K9 with AIR-WLC4402-50-K9 because of the AP amount issue. Both controllers are running on the same software version 4.2.61.0 . Just out of curiosity, can I just backup the configuration from the old one...
Hi all,I need you help on the issue which i am facin.I have guest users wireless access and when I connect to the access point,It does prompt me for the username and passowrd I enter and then it tries to connect to internet and then does nothing.Is t...
We killed an aironet 1242AG access point - someone installed the LWAPP software and it either got corrupted or the software itself changes the way the device functions dramatically. In anycase we want to revert it back to the way it is supposed to b...
Hello,Firstly, i'm sorry if this answer is already answered.I have a network with :1242 AP's (autonomous/lighteweight) 4400 WLC.and i would like to make this design :Wireless client <-----> 1242 AP's running autonomous <-----------------------> 1242...
Trying to download latest WLC and recieve the following error:Authorization Failed. No sufficient privilegesUser account I am using has read/write access.Any thoughts?Thanksizzy
I am running v6.0.196 on 2 WLCs. Aggressive Load Balancing is disabled globally via WCS. (Configure / Controller / General / Aggressive Load Balancing = Disabled). When running the Voice Audit Tool against the VoWLAN, I receive the following:"Aggre...
Hi all,I manage a WLC 4404 ( with 4.2.176.51M IoS) and I've only got 2 models of access points in the solution:For indoor - AIR-LAP1242AG-E-K9 For outdoor - LAP1510My question is if I can integrate any LAP iwith this WLC (mesh), like:...
Dear all,I've got an issue here with some 1242AG access points:A stationary mounted AP is configured to have two SSIDs in two VLANs on 2.4GHz radio module. One SSID is secured (WPA2), one not.A mobile AP is configured as a WGB and connects some clien...
