Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
I have 14 Cisco 1121G's setup. When walking around with my laptop I am ok. I will lose one ping as I transition from one to another but with data that is fine. The problem is that I need these for voice. I am using Spectralinks for voice and have fol...
Has anyone used the HWIC-AP cards with yagi antennas for point to point links?We are going to be adding a new building in the near future, no permanent employees just some equipment that needs to be accessed and monitored so high speed (i.e. 100mb pl...
I am getting ready to upgrade all or our WiSM's and the WCS. Currently running 4.2.81 WCS and 4.2.112 WiSM. My question is, is there a preferred order as to which to upgrade first, the WiSM or the WCS?Seth
i configurd dhcp pool in the AP. Still its getting dhcp through the dhcp server located in the network . i want to use the dhcp pool inside the access point. did anyone come across this issue
Hello everyone! We have a Cisco 2125 Wireless LAN Controller with Cisco 1130AG Access Points.Is there a way to configure the WLC 2125 to allow only a certain number of connected/associated wireless users per access point?If so, how would I make that ...
hiwe have two controllers with 32 APs. Today all the APs associated to 1st controller got de-associated.Eventhough it did not associated to 2nd controller.Can someone advise me why this has happend and what are the required configurations needed to w...
My local VAR is suggesting we purchase two or more Cisco AP1131AG access points. We currently have a couple mixed brand wireless routers that each service a specific area of the building and broadcast a unique SSID for each device. We want to get mor...
I need to set-up a ip helpet statement in my WLC so the 7921 phones grab an IP address. The DHCP scope is on the router.Where do I point the helper statement to?
Hi, We recently purchased a few more 1131 APs for a remote office. For some reason, only one came as LWAPP AP, and the rests are all Autonomous APs. I have successfully upgraded one Auto AP into LWAPP, it is under control of that office's WLC. The im...
I want to use wireless 1250 series LAP with wireless controller 2112 series.The A.P frequency will be 2.4 Ghz.01.To support wireless n or b,g wirless clients how many antenae we must use ?Suppose I use only one omni 5.2 dbi antena on each access poin...
Hello,Are there any logs on the WLC that can capture the MAC,IP address and User Name of a client ?We want to send this information to a syslog serverWe have increased the logging level and We are looking for the information in our syslogs but it is ...
Hi,I have Access Point with IOS c1130-k9w7-tar.124-10b.JA3 and I am converting it to LWAPP when I try to convert it to LWAPP by using the LWAPP upgrade tool and image, the error comes that “AP does not have supported Radioâ€. I have checked that C...
Hi all,I have a Cisco 871W, but no experience .. My connection is 100/100 Mbit. And I have four PC's connected to the router. One in every connection. But now every PC gets about 25/25 Mbit. The router seems to split the speed. Even if only one PC ar...
Hi all,I need urgent help. I need to boot ourAP to rommon, but It doesnt accept break sequence Ctrl + break. I use putty as connection client to console port of AP.Any idea?BRjl
Anyone can clarify me if is correct or not to confifure the WISM controller on a 6509 management in VLAN1 or is a must to put ( as Cisco Described : http://www.cisco.com/en/US/docs/wireless/technology/wism/technical/reference/appnote.html#wp40841 ) i...
