Wireless

I have a network that consists of 5 1310 bridges. One is in Root+AP mode and servers as the central node that all others talk to. Today all of the bridges are open with a single hidden SSID. I would like to begin migrating these to WPA encryption. I ...

Hi There,I just have one CiscoSecure for both Web Auth and 802.1x.When working with WLC, how can we distinguish the user that is logged in by Web Auth or 802.1x?Thank you.

Hi all,Can wireless client associate AP by existing loading of AP but not by wireless signal strength?Thanks & Regards,Eric

Hello, I've got a cisco 1240AG K9 AP plugged into a DSL router. It has a factory config with DHCP enabled and one SSID. This AP is set up for open, unsecure internet access in our dining areas. Problem is, I have office PCs in the vicinity jumping...

HelloI tried to alter the vlan configuration for the management interface on 4402 controller. The management interface are tagged with the vlan 55.Now, I d'like to change this vlan 55 definition to a untagged configuration. On the corresponding swit...

First time playing with c1252 and I got some issues. 1.I enabled all the high throughput rates, set WMM policy to 'Allowed' under WLAN and tested with open authenticated WLAN under 2.4g. But I only got 65M on both Linksys 300N card and a Macbook. Wha...

Hi,i have 2 cisco aironets 1240 connected on site-1 to a 3750 and site-b to a 3560 switch...i've called TAC a few times to help with setting up an EtherChannel beetween these 2 bridges but they have no clue how to do it...every tech tells me somthing...

Can anyone advise on how to use the Local EAP in WLC. I'm trying to set up EAP-FAST authentication for the 7921g phone without ACS. I have a Windows IAS available but I couldn't find support for PEAP in the 7921 even though the documentation mention...

Hi dear,i configured two (2) 4400 Series WLAN Controller as cluster (one primary and one secondary - Active & standby)...It works fine...But i have only one concerns:During my clustering tests, i noticed that when i switch-off the primary all Lightwe...

Hello, I have two controllers Cisco 4402 with Software Version 3.2.171.6. The network have authentication WPA, data encryption TKIP and PEAP authentication. With Windows XP customers I have no problem, but customers with Windows Vista gives an error ...

Does anyone know if a workgroup bridge/non-root bridge will pass information to back and forth to a WAP that is downstream from a non-root bridge through a switch connected to the non-root bridge. I have verified network connectivity between all dev...