Wireless

Cisco Wireless LAN Controller 4402 can support lightweight access point 1242 over wireless backbone or need ethernet connection?

Hi,Anybody outhere had experience problem with non-cisco antenna connected to Cisco AP? I had this one external antenna 12 DBi outdoor omni that connected to Cisco AP1242AG - LWAPP. The performance that not really realistic and the signal keep showin...

Hi there,I got the strange messages on my wism(v4.1.158.0)Jul 03 14:41:24.148 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:1a:70:a6:b9:feJul 03 14:41:22.821 apf_fore...

I have several 1130AG LWAPP's running 12.4(13d)JA connected to a contoller running 5.0.148.2 SSID's are broadcast - usually no problem.However, I've noticed that several different vendor wireless cards cannot see both SSID's.Running a wireless captur...

Hi All I have problem with my wireless access point when I connected to the wireless adapter I can not ping one IP address, other ip responds. The ip address that I can't ping is a network load balancing address between to server'swhen I is connected...

I need to intall 04 Aps in an area where all of them have contact. I now know that the best practice is to use the three channels combination, but what would be the best way to do it? How could I use the 4 APs considering that two of them will be in ...

Hi All,please can somebody help?I was doing a simple test today with 2 AP's, both AP's are powered by Cisco Power Injectors. I was expecting that my client would simply switch association from one access point to another if I disconnected the etherne...

Hello, We are trying to get a 1242AG access point to have users connected to it to authenticate on it to the ACS server. The 1242AG has a new menu - AP authentication. Has anyone delt with this menu and gotten this setup to work? Version is 12.4(10b)...

In the GUI of a 4402, I have 2 - one way deny rules for http and https traffic.If I block 1 way, do I have to block the other way too?If so, why?Thanks!

I have a remote site customer with a Cisco WLC 4404 and 1130 Access Points. They are using SpectraLink wireless phones with no probem for about 6 months. Recently, there is about a 1 second latency when using the IP Phones. NetStumbler is seeing vari...

Hi,I have a Cisco Aironet AIR-AP1120B-A-K9 802.11b Wireless Access Point. Can I integrate this AP with AIR-WLC2106-K9. Thankx and regardsSatish

So far, we have been told to continue to use the guidelines for 802.11b/g when designing for 802.11n.However, there are, no doubt, additional considerations that we will need to account for.For example:* If the coverage quality is increased with 802....