Wireless

Hi all, Can anyone tell me what I need to do to configure my 1240ag access points to work with my wlc using lwapp.Also how reliable are the wlc's should you use a backup wlc on each site ?

Is possible to manage webauth having a proxy enabled on the browser client?If I select a proxy on the browser and I can not access to the web page login controller.thanks.Mirko Severi.

I finally got the configuration guide to work and find my AP, but I thought I could change its IP adress from within the configurations assistant? How do I change its IP adress? I also thought I could change it to and from stand alone mode, Im not su...

Greetings,Next week I'll be conducting a survey using a 1242 lightweight AP at a two story medical building. Does anybody have some white papers, articles, or advice on how to conduct for location?I understand the triangulation aspect, and to line yo...

I have 5 4404s which have been up in a lab environment for a few months. I just deployed 9 - 1131 APs to my first test site last night. I expected them to automatically set the channel number on the radios however when I checked, 7 of them were at ch...

Hi, all!I'm trying to configure auto startup of Wireless Control System on Red Hat ES 5.1 runlevel 5. But any manipulations with init scripts doesn't help.Can anyone provide a solution?Also I have a problem with starting WCS on runlevel 3, but on run...

We have a 4402 controller working with 1132 access points. I have the 4402 attached to a 3750 switch port with trunking enabled on the attached port. The controller management ap-manager interface is on VLAN 8. WLAN defined use other VLANs.I have the...

Hi all,The above error is seen in a debug whilst trying to connect a Panasonic Wireless Projector to an AP. The encryption on Radio 0 is set to wep mandatory and I am using mac authentication just for the projector. Is there any way that an exclusion...

We have a lab controller (4402) that no one seems to know the password for. Is there a way to do a factory reset without having been logged in first?i don"t mind losing the existing configuration>thanks

Hi all,I think I know the answer to my post but I would like a second opinion.I am trying to trunk a Cisco 1200 AP to an ASA 5505. The AP must have a native VLAN on VLAN 1 according to this link:http://www.cisco.com/en/US/docs/wireless/access_point/1...

Hi guys, 3 questions in here:What code do I need to run 1522 APs? Do I need the mesh code or the main code for the controller?Also, for using a mix of APs (1242 as mesh, 1242 as non-mesh and 1522) do i need also the mesh code?We already have the cont...

Hi,I know this is unsupported but I would like to use the 7921G with Asterisk connected through an atheros linux minipci card on 802.11a, it appears world mode is not a problem for 11a, my phone is a W, I am based in Australia.Any gotchas, I should l...

I'm setting up an H-REAP scenario which also uses AP VLAN Groups to map a single SSIDs across a campus to different VLANs at various campus buildings. This will keep the VLANs to a manageable size, as well as keep throttling of uplinks to the rest of...