I have an order in for WCS for Linux. I am reading that I need Red Hat 4.0 ES or AS to run WCS. My question is do I need to buy Red Hat 4.0 ES direct from Red Hat or is it freely available for download? Any links would be greatly appreciated.
I have an order in for WCS for Linux. I am reading that I need Red Hat 4.0 ES or AS to run WCS. My question is do I need to buy Red Hat 4.0 ES direct from Red Hat or is it freely available for download? Any links would be greatly appreciated.
Dear i have 3 building in the first and second building i used integrated switch with controller .if i use bridges 1310 to have connectivity between main building and the two buildings .do the LWAP and integrated controller will transfare the data to...
Hi Everybody.Does anyone have an idea of specifying the Controller by using DHCP options.We are using : - AIR-WLC4404-100-K9 Controller - AP-1010 AP-5312 Access-poinst - ISC DHCPd 3.0.1 dhcp-serverThe logs on DCHP server states that the Access-points...
I have a WLC4402 with 2 distribution ports and the following mappings: - port 1 : Mgmt , AP-mgr , CorporateWLAN- port 2 : GuestWLANThe aim is to have a physical split between the 'internal' and 'external' network .Now my question is if this kind of s...
Hi all,Does anyone know ewhere to set the "MaxRetransmit" option on the config of a 4400/WISM. By detault the APs will reboot after retransmitting 5 LWAPP packets, i want to increase this value, but cannot find the option?RegGoen
Hi,Please help me in configuring redudency WLSM.regardssrihari
Hi,I am a Uni student and have an assignment to create a large WLAN. Please could anyone point me in the right direction as I need information about how to design and plan the WLAN before I start looking for equipment. I have tried all sorts of searc...
Hello,I have to configure a second AP as a repeater, and these are the steps that I done:1- the 1st AP is working as autonomous AP2- the seconde one i make it associated with the SSID of the 1st AP3-I configured the roll of the 2nd AP as repeaterI th...
Hello, I would wish to know the power in watt used by this access point. The purpose is to connect it to a solar panel. Thank you in advance
Phones constantly authenicating to radius server, I would think that WDS would take authenication after phone connects once. Wireless network and phone configured by a contractor. We have a WLSM installed in a 6500, 76 AP installed all on the same su...
I'm wondering if it's possible to have two 871 ISR's join to be 1 network? I have one router right now and I want to put a second in our warehouse, located about 1500 feet away from the existing router. Can the 2 routers join to create a single netwo...
How much area do an accesspoint will cover? How many users do an accesspoint will support?
Hallo!Does anyone know - how can i make my access points (for example 1200 series) work with 802.1n? Will it be enough to just install new software on the old AP or i need to change hardware(for example chage all my AP to newer, which support 802.1n)...
Hi guys, i'm having some connectivity problems with an 1231 AP, and i have some question for you:Is ther a problem if the AP and the clients are on the same segment (vlan)? I have a configuration that looks like this:interface Dot11Radio0 no ip addre...
We now have two installations that utilize a unified wireless (WLC or WiSM - AIR-LAP1131AG, AIR-LAP1231G, AIR-LAP1242AG access points) that have been exhibiting the following IDS false alarms:Disassoc FloodAP ImpersonationWe have TAC cases going back...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-17-2026 11:43 AM | ||
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM |
| User | Count |
|---|---|
| 4 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |