Wireless

When i add ip address 10.100.100.1 255.255.255.0 secondary to interface Bv1 and i type show running-config i can't see secondary ip address.Why?Many Thanksap# sh verCisco Internetwork Operating System Software IOS (tm) C1200 Software (C1200-K9W7-M), ...

I'm hoping someone can lead me to the right document or show me some example config to have my 871w use MAC address authentication. I currently have it setup to use WPA successfully, but for added protection, I'd like to use MAC address authenticatio...

Hello,I use freeRADIUS to authenticate WLAN Clients. Traffic is encrypted with WPA and clients are authenticated with LEAP or PEAP.The AP 1220 with IOS 12.3(8)JA2 works well and the configuration is the same for PEAP and LEAP.The value "Session-Timeo...

Hi,I was wondering if anyone knows if it is possible to vnc to remote vpn clients that are assigned an address from a client IP pool defined on the pix.The remote clients are using cisco vpn client, the access-list is a dynamic acl downloaded from a ...

I am planning a rollout of dot1x using mac-address authentication with SecureACS v4.0. Does anyone know if there is a way for ACS to point to a database of mac-addresses so I don't have to update it manually (say a machine is retired or a new machine...

Hello,Sorry for my English, but I am French and I do not speak very quite English.I will like to know which is the VCI string for an AP 1232AG to inform in the 43 DHCP Option.Could you help me ?Thank youBen

int BVI1ip address 10.0.1.1 255.255.255.0ip address 10.1.1.1 255.255.255.0 secondary Need the radio int on a different network from the ethernet int. Planned on using a secondary address on the BVI int.I've had no luck adding a secondary address to t...

I've been beating myself in the head trying to figure this one out and I'm sure it's an easy one. I keep getting a "WLSE failed to authenticate with WDS" error for my primary WDS APs in all my sites with a couple of exceptions. We have a second WLSE ...

I do not any knowledge or experience on WLSE. This is the first time I have heard of this product. Customer says that he is not able to see or manage this one CSC AIR-AP1131AG-N-K9 11a/g but can see and manage other Access Points. He tried to delete ...

Looking for a "recommended" design. Looking at a remote location that contains no Cisco switches or router. 5 AP's total. Seems kinda of pointless to setup a 4402 Controller for 5 AP's. What is the recommended REAP mode implementation (real world) fo...

Hi,Autonomous 1200 AP [running Cisco IOS]can work as a bridge unit. When I cpnvert this AP to LWAPP will I get the bridge functionality? In case of 1300 AP/Bridge LWAPP is supported only for AP and not for bridge.If I can get the bridge functionality...

Dear friends,Somebody could PLEASE give me a step-by-step of how configure this stuff??? The ACS configuration is all complete, but I couldn't simply associate and authenticate my clients against RADIUS server.I tried to follow the configuration guid...

My customer has just upgraded from ACS 3.2 to 4.0 to resolve some problems and now have a big issue that wasn't there previously. It is a well-known problem: unable to roam with Windows XP and PEAP. I believe there is a Microsoft fix but this is not ...

Hi,I have a 12 bldg campus that I am looking to deploy LRE and wireless and I am trying to familiarize myself with the correct layout of the equipment. I currently have the following set for configuration, 2900 series LRE switch at the main bldg,with...

What is the sub-option code that has to be delivered as part of a DHCP Option 43 response for a Cisco Aironet 1510 AP?Thanks,Adrian