Wireless

Can anyone help me about to find documentation about configuration of PEAP using radius inside the wlseThanks

Does any one know how to enable PSPF in WLAN controller? Is it supported?

Hi.I have an install using 1130 LWAP's and a 4400 controller. In one of the conference rooms clients get booted for a second then they reassociate. Using netstumbler I can see it graphically where the AP just stops transmitting.There also appears to ...

Which is the problem when the CLI is like this? and what do I have to make? ap:ap: ? ? -- Present list of available commands arp -- Show arp table or arp-resolve an address boot -- Load and boot an executable image cat -- Concatenate (type) file(s) c...

which access point could be use on 4400 controller?Is the AIR-AP1010 fitted on this?Thanks

How can I configure the WLC to recognize a WLAN (subnet)across a WAN link? If I create a WVLAN interface on the WLC for the remote subnet, the WVLAN is local to the WLC. I thought I needed to do some sort of config using REAP, but when I select REAP ...

Hello,I need to clarify the dynamic WEP key rotation mechanism.We use PEAP MSCHAPv2 authentication in WPA migration mode with ACS3.2, AP12xx, AP113x and Windows XP SP1 native Wireless client.On the AP we have :dot11 ssid WLANvlan 10authentication ope...

Could Rogue Access Point Detectionon the backbone prevent third party (non-CCX) clients from getting on the network? Thanks

Hi,I'm getting this Authen-Failure-Code in Failed attempts report when I try to authenticate with PEAP against a ACS 4.0:"Authetication session invalidated"I'm not able to find ny reference to what this means ? has anyone any info on this and what it...

Hi AllIf I had an AP that was registered manualy to a a single controller which was part of a mobilty group.. then the mobilty group was disabled and I tried to register the AP to the other controller, it still seems to try and hand it off elsewhere....

I work at a college campus where we have a couple of 1310 bridges between our main campus and a group of apartment buildings that we own 3 blocks down the road. One 1310 bridge is in our bell tower and the other is in one of the apartments. The other...

Individual AP1231s on a site with 23x APs randomly stop transferring data from hand held clients. The APs give no indication of a problem and nothing shows in the logs. Only a reset cures the problem.

Hi all,Any changes to the configuration of AP 350 through http is followed by "The page requested is no longer valid. Please click "here" to continue working from the Summary Status page"And from the console port i cannot reset to the factory default...

I would like to deploy a wireless network to cover a large area. The problem being that only one location well be the root bridge and I would need all non-root bridges to be able to forword there traffic to the root bridge. In this situation I would ...