Wireless

We are currently in the process of deploying a wireless LAN. We are considering using the AP 1200. However our main headache lies with the overflowing of our signal outside the desired area. According to information gathered so far, it would seem th...

I am using 1200 AP's. I noticed that on a couple of our access points, under AP Radio: Internal Advanced, the fowarding state is blocking. When I do a "help" on this it says that the port is blocking transmission. This is the state when no stati...

I have a simple deployment of two 1100 series AP that is providing wireless connectivity to end users so they can have DSL. The network is running fine UNTIL I activated the MAC address Filter that I had built. I had a few end users that could not ...

Hello there,From time to time, I see MAC addresses of machines that seem to be associated to the WAP; however, the machine does not have an IP address, so I cannot track it down(I did an ARP on the core router, but it could not find the MAC). These w...

I want to configure PEAP on WIN2000 with the 802.1X patch. I have ACU ver.5.05 and ACS3.1 on windows. My external LDAP stores passwords in clear text format. Am I gonna have any problems since the PEAP uses MS-CHAP V2 and the LDAP uses clear text?Als...

How to design the best AP/client ratio ?

I have a BR350 in access point mode that I am trying to talk to using a Linksys WET11. The problem apears to be that the WET11 does not have all of the options to allow for long links like the bridges do.Is there any plans to release a new firmware ...

Hi, I have 13 A/Ps. I have created a VLAN (VLAN55) which consists of the FA ports where the A/Ps connect. Our laptops , all using Cisco 350 Aironets can get an IP address in the proper (55 net) range. The portable RF units (Symbol scanners, PDT's etc...

We've been mandated by corp. to convert to VPN.Currently we are running an ACS server with cisco 1200s across VLANS using leap. We service at this local site, about 500 users with a need for proable 200 simo-logins. At the end of the day we will need...

Hi,Does anyone know if ACS 3.2 is available from Cisco yet? ACS 3.2 is supposed to have support for Microsoft PEAP.Thanks.

We are planning the installation of a number of Access Points with LEAP authentication to ACS. We want to know upfront whether the users have to reautenticate everytime they roam from one Access Point to another. Is it the same with EAP-TLS or EAP-TT...

Here is the goofy situation I found last night. I have installed a very large WLAN network for a local government. Most of the network is based on the BR350s, but there are some BR340 segments that live on their own. The radios are all in the same...

Hello, I've deployed a WLAN using a root AP and some Repeaters (AP352). I've configured the the Ciscos to validate clients by MAC address, using a RADIUS. Is there any way to centralize authentication in the root AP. Now, I have to configure my radiu...

Just looking for a bit of advice and hoping I've not missed something really...I have just installed 3 Aironet Access Points, a 350 and two 1200's. I have used this sort of mixed model setup before without a problem. I have set 'Broadcast' SSID to ...

After updating the IOS to 12.2(11)JA the Boot Loader remains the same 12.2(8)JADo you have any ideas how I can make the Boot Loader have the same version 12.2(11)JA or this is not important?Thanks,