Wireless

Any chance Aironet 123x or older can be converted to use standard 802.3af power injector? Another question: Does the 1100 series have a field upgradable radio module similar to the 1200?

I have deployed a Cisco 1200 AP and was wondering what the best way to lower the broadcast strength is. I have lowered the CCK Transmitter Power, OFDM Transmitter Power and Limit Client Power settings to 1 on the Radio0-802.11G interface (which has h...

I am using an 851W configured with WPA-PSK and TKIP. I am getting an awful lot of messages in the log stating that a client has disassociated because it was leaving the BSSID, then the client immediately reconnects. I have duplicated this behavior wi...

Does anyone know if the Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter· AIR-PI21AG-E-K9will work on windows 2003 server, I'm not sure if it comes with the correct drivers, as very few Client adapters do.If not, can anyone recomend an adapt...

Been running WDS on a site with a number of APs for some time,mainly using wireless IP phones. I am using MAC authentication, and on the AP use the "dot11 aaa authentication mac-authen filter-cache timeout 36000" command to stop the APs going to the ...

Hi,Does anyone know of any good books, white papers, URL's on wireless 802.11a/b/g design guides for large multistory buildings? I'm talking about buildings that are 60 stories plus.Thanks!Steve Monsey

AIR-LMC352 is now obsolete. Could anybody suggest alternatives with 16bit bus, external antenna connectors, and WPA?

I have installed a BBSM53 at a client site. It is primarily used for guest Internet access. However, the company in question obviously want to stop guests accessing websites that may contain offensive material.Natively the BBSM53 does not support URL...

HiI want to secure the communications between 2 Br1310 acting as point2point bridges. That is, I want to make it as close as impossible for anyone except eachother to talk/listen/whatever the radiotraffic inbetween.I have done this:ssid <long random ...

I am using an 851W configured with WPA-PSK and TKIP. I am getting an awful lot of messages in the log stating that a client has disassociated because it was leaving the BSSID, then the client immediately reconnects. I have duplicated this behavior wi...

Hi Does anybody has the same issue that when you want to make an Wireless Client Report you cant select the end Date to 2006?regards Bernhard

Here is the info about the 1100s AP I have in the office:Product/model number: AIR-AP1120B-A-K9Part number: 73-7886-04Basically I was trying to upgrade the system software from 1100-k9w7-tar.123-2.JA2 to the latest version of c1100-k9w7-tar.123-7.JA2...

Im doing an install with a couple dozen 1230 B/G AP's and one of the requirements is to have the user first go to a default disclaimer page before going to the internet. I cant think of any way to do that other than with BBSM. Is this the case? thank...

Hi, We currently have a 350 Wireless Bridge on 2.4 Ghz. We are currently trying to connect AP1231-G-A-K9 on 2.4 Ghz point to it. Can this still work if the 350 Access on 802.11b while the 1200 on 802.11g?

Hi all,I'm trying to connect two buildings using a point-to-point wireless connection. I'm not having any luck getting a non-root BR1310 to connect to a root BR1310 using open authentication with EAP. My non-root bridge keeps throwing up the error: I...