Wireless

I have a AP1200 where someone appears to have formatted the flash - there are no files at all in flash or DRAM, no even the installation key. All I get on boot up is the boot block menu. Presumably I can download the relevant files to it, but which o...

Hi all,could someone tell me if it is possible to have 2 1300 device configured as follow:- 1 aironet 1300 configured as Root Bridge With client association ( Root bridge & AP ) - 1 aironet 1300 configured as Non root Bridge with client association.I...

I have a Cisco 1220 AP running IOS Version 12.2(15)JA with 3 clients connected. Ocassionally, the clients' connections will get really latent for a few seconds. Continuous pings from the clients to the AP show dropped packets and return times of 2,00...

Hi allI've upgraded one of our Cisco Aironet 1200 acesspoints yesterday. Unfortunately, the 802.11a wireless stopped working since the upgrade.I have checked the configuration, it is exactly the same like the configuration on the ap's with an old ios...

I have an AP1231G running 12.3(2)JA2 and have used the express setups to create a WLAN running WPA on VLAN200. I have an ACS server setup to authenticate to Windows 2K3 AD. When I attempt to connect the client (Win2K SP2) sits there saying "Attemptin...

Hi,For a Point-to-Point link with two Aironet Bridge 1300. What's the best security configuration?Can I configure a root bridge without client like bridge 350?Can I configure WPA-PSK?Thanks

HelloFor BBSM redandancy, it is explained in cisco that we can use 2 BBSM server with one CSS11052It will be interresting to use 2 CSS for redendancy. the solution will be complicated. so can we save the SQL databse every day and reinstall it in a ne...

Ran into a little trouble when upgrading one of my APs, a 1200. Now the flash only consists of the c1200-k9w7-mx.123-2.JA file, and not the directory ,which contains the html folder, and I which I believe gives me the http access to the AP. It seems ...

I am looking at setting up some Cisco 1200 Access points to authenticate clients using a Cisco Secure ACS Solution Engine. I would like to have the simplist possible setup on the clients, but need to have username and password authentication to conne...

I have a few access points in public locations that I would like to secure better. Is there a paper or link that states the correct way to configure security on a trunk port going to a AP so that if someone unplugs the cable they cannot get connect t...

i currently have eap-fast running on 1200 access points, acs and i am using the wlsm as the wds. i am experiencing disconnect issues.is it possible to run both eap-fast and leap on the same ssid, vlan and mobility group? i would like to run these sim...

I just found out, that the wlse (2.9.1a) discover and recognize AP1230/AP1231 as just an type of AP1210. Is that normal?Could anyone confirm that?best regards Oliver

I sometimes see a question mark in front of the IP address for an access point on my network. The AP seems to be operating fine. Can someone explain the question mark, or, better yet, point me to the proper documentation for finding such explanations...

The colleges won't use anything proprietary/single vendor, as they can't require students to have Aironet client cards, etc. I was thinking Win2003 Server with each semester a OU that has the CRL revoked at the end of the semester -jason"If you can w...