Wireless

Hello,I would like to use a 1300 Bridge in AP mode. I didn't found in web administration interface any menu about local radius server like you can found in AP1100 menu.Does that mean this 1300 Bridge haven't local radius server possibilities ?Thanks ...

Does anyone know which types of traffic I encrypt when use static WEP key (64 or 128): unicast, broadcast or both of them?Thanks for cooperation,Jovan.

HiUpgraded 25 AP1230s from 12.2(15)JA to 12.3(2)JA five days ago. All APs are configured with same vlans ssids etc. Currently we have 4 ssids and vlans with differnt grades of security.Vlan 3 use Wep, PEAP and Mac authentication/encryption.Vlan 15 an...

I am getting ready to deploy some access points and I am using MS PEAP with ACS and Active Directory. I was thinking about using MAC authentication as well but I noticed something. In order to get MAC authentication to work you have to put the MAC ad...

ok, I didn't pay enough attention in geometry class.. I'll admit it, I was sleeping. is there a simple formula out there.. if I have a 6.5 degree beam width, a 36 inch high antenna, with x amount of feet of distance, what will be my beam width, y.any...

HiI was doing a testing with 350 bridge as access point and did static WEP keys , MAC authentication and then enabled require EAP . now i have a firewall acting as radius server and i added a client and AP to it. Also the radius server page was confi...

For VXWorks firmware for Access Point 350, I can enable the "Search for less-congested radio channel" function, but how does it work? If I set the default channel as 1, does it scan the channel from 1 to 11 automatically, if I set the default channel...

I am planning on hooking up 20 different sites ranging from 8 to 15 miles with Aironet 1310 wireless bridges. I am wondering how important the height is most of the locations already have towers that are 150 tall and some only have towers that are 30...

Can a "350 wireless bridge" be upgraded to IOS ?From what I gather through trial & error and reading, the "350 workgroup bridge" can be upgraded to IOS but not the "350 wireless bridge".Not knowing the diff, I tried the "350 workgroup bridge" IOS upg...

I currently have a working WPA-Leap setup working using a 350 client.The 1100 Access point is running 12-2-15-xr2 firmware. Authentications work with ACS 3.3.1 from the local database or a windows NT database. I have followed all the tips online for ...

I have a Cisco 7920 IP Phone that is using LEAP. It Authenicates fine to the AP, but the weird thing is that it says it's configuring the IP network (it grabs a IP address), then it downloads the config, and then updates the firmware, and reboots. It...

Hello,I have what I thought would be a fairly easy question to answer:How do I get an AP1200 to authenticate by MAC address from an ACS server instead of the AP itself? I should also mention that I'm using WEP and VLANs (multiple SSIDs).I thought the...

It exists Aironet Client Utility for Aironet Adapter 802.11 a/b/g ?Regards

We have a wireless setup consisting of 4 AP1200s. Two on the first floor and two on the second floor. The first floor seems fine clients can connect to the network and are assigned an Ip address. On the Second floor we can connect to the AP but are n...