Wireless

Hello,I read in the "Release Notes for Cisco Aironet 340, 350, and CB20A Client Adapter Firmware 5.30.17" the following phrase :"Access points must use Cisco IOS Release 12.2(11)JA or greater to enable WPA"Does that mean I can't set up WPA with a Net...

I am trying to setup a wireless network at work. I have got four 1100 G APs. I want to setup wireless for all laptop users. I am using WIN 2000 AD, IAS RADIUS server. Which is the best way to implement wireless with security in mind. Is there any goo...

Is it possible to use a 1310 as an access point and a bridge at the same time by using the 802.11a radio in bridge mode and the 802.11g radio in access point mode or vice versa? I would like to be able to connect wireless clients to an access point i...

Hellodid anybody use this feature successfully?Which Radius type do I have to use on the ACS?***aaa group server radius rad_acct server 192.168.100.12 auth-port 1645 acct-port 1646aaa accounting network acct_methods start-stop group rad_acctssid tsun...

We have recently upgrade 17 cisco 350 AP's running 12.01 T1 VxWorks to IOS 12.2(13) JA1 via WLSE 2.7.1The upgrade was a struggle but all were finally upgraded. We are now noticing that these upgraded AP's are frequently leaving the network and have t...

We have a customer using 7920 with Firmware 1.08.He tries to test the Beta firmware (cmterm_7920_3.3.02_05_005.bin) on some 7920.The upgrade finished correctly and after reconfiguration, 7920 register to the APS.On two devices, he got a problem: - Th...

Running 1220 APs with 12.2(11)JA3 ios loaded. With my 1230s I put in mac addrresses to filter and they work. None of my 1220s work with the mac filtering. I set up acls to block or allow etc, and they just don't work on the 1220s. Why is this? The ma...

After installing the new firmware release in Cisco Aironet 1200 Access Point version 12.3(2)JA , we came up with a problem that occurs in broadcast traffic. The Access point doesnt forward the broadcast packets transmitted by the station. This proble...

I am unable to get my repeater ap1200's to associate to a parent 1200. I receive this error on the repeater:%DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Received disassociate%DOT11-4-LINK_DOWN: Interface Dot11Radio0, parent lost: ass...

Have set up a PP link with 1310BR. Link works great. One thing I just noticed, is that when I view my root bridge in the association table from the non-root bridge, the ip address doesn't show up. (all zeros) I'm also unable to discover it through WL...

Hi, I have given it a hard try but could not found the sysOIDs for these devices - Aironet 3500, Aironet 4500, Aironet 4800.If anybody points me at the right location it would save the fate of my analysis.Note, I couldn't find this in Cisco-product-M...

- Critical Bad enqueue of 895C40 in queue 87B4E0 - Information WLCCP Infrastructure Authenticated What is the message about?

we have installed some new aironet 1200 access points, and now we get a lot of traps in our HP-OPENVIEW installation. I am not shure are they important or not. The traps aredot11Deauthenticate and dot11Disassociate.Should i use this traps, or can i c...

We (Cisco Advanced Services) are working to update a Beta class that discusses the secure use of voice and video over wireless.Quick Question: If you had to put together a "wish" list of topics and lab exercises you would want in a HIGHLY technical i...