Wireless

Folks, I have installed about 10 access-points in a company. Everything seems to be working fine, except fast roaming. I had a question about overlapping channels. Since the access-points have G radios, i presume that you can have 8 overlapping chann...

Some of my 350 ap's reports : Possible rogue AP 000000000000 detected: Reason "0".Does anyone know what this means ?RegardsJohann Folkestad

Folks, Is it possible to login only one into windows and not login to the leap client, assuming that you are using ACS whihc is point LEAP credidentails to the WINDOWS domain controller so same password and username. Users in my company do not want t...

Hi, I am having problems using 802.11g client adapter on a windows 2000 enviroment it has to do with when domain authentication occurs in the startup The main problem is: Its almost like the Cisco utility isnt running as a service and/or the card isn...

I read that a subnet can only have one WDS AP per subnet, but that it can only support roughly 30 AP's. We will eventually have about 150 AP's running on the same subnet. Is there a way to get around this limitation without having to further subnet o...

I have a current requirement to configure a second VLAN on our WLAN to create wireless "Hot Spots" for our patients and guest. I have to put it into place to where they have access to the internet but not our corporate network. I am some ideas on how...

Hi all,i'm experincing some trouble about a 1100 access point and a/b/g cardbus adapters AIR-CB21AG-E-K9.The AP seems to work correctly with WLAN clients statically IP addressed, but the client doesn't obtain a DHCP address. Tried to disable MAC filt...

Hi, Please help.I have a 350 series WGB running software v8.65.02. After configuring it with an IP and an SSID. It worked fine. A duplicate IP address with another device caused it to lose its IP. Even after changing the IP address of the other devic...

I have a 1200 IOS access Point, it crashed the flash earlier today and I am unable to install a new image. I have tried via TFTP after settig the variables but it failed.Can an image be downloaded using xmodem from the bootloader image?

Hi,I have two Switch 3Com SS3 3300 with fiber optic link. Can I do a backup with a wireless point to point configuration with two aironet bridge 350?With Spanning-Tree protocol?

The following product is in the price-list:AIR-BR1410A-E-K9 (Aironet 1410 Integrated Metro Bridge, European Config)Does the "European Config" means that it can be used (legal) in Europe and/or the Netherlands?

HiIs there is a way to Configure IP Pool on the wireless access point for IP Address Assignment to the clientsThank you

Any help on associating IPAQ 5150 using PC Jacket with Cisco 350 adapter. Won't associate with any access point configured with management VLANs. Will associate with AP's without VLANs. Any ideas. WEP isn't an issue.