Wireless

I have a 350 Bridge to Bridge configuration.Root Bridge & Non-Root Bridge W/O ClientsI want the communication between these (2)bridges to be secure.How do I configure WEP?

Remote site has 7960 phones, Linksys WRT54-G wireless, and Cisco 827 DSL coming back to a callmanager 3.3 When we power on a 7920 phone the 7960 phones will unregister with the call manager, but the 7920 will work fine. Turn off the 7920 and the 7960...

Can I use Cisco URT to assign VLAN by user without domain and DHCP server in the URT network?

I upgraded the firmware in my AP-342 (from 11.03 to 11.04). Access point works but ...In the section "Manage Installation Keys" now is the information:Cisco AP340 12.04 MAC Address: 00:40:96:34:10:ed Serial Number: XXXXXXXXXXX Device Type: AP4800-E N...

We are experiencing a problem during LEAP logon, whereby when it gets to the stage of "Finding Domain Controller" it takes around 45 seconds for this to complete - therefore logon times are quite long an complaints begin. The latest version of client...

After some initial testing of this new ACU, I have noticed that this new version still takes about a minute and a half to get through the authentication splash screen before your desktop appears. It sits on "Finding Domain Controller". This also happ...

I have a 350 AP that at one point had IOS on it. it seems to have no files in the flash right now... i'm trying to load ios back onto it using tftp... the tftp_init command doesn't seem to do anything and i get a permission denied error when i try to...

Today (in my home office) I have a Cisco Aironet 350 PCI card installed in one of my computers, and a cable directly connected to the card from an antenna on my roof. Now I have a second computer, and is looking for another device to connect to the a...

Hello,I am having a strange problem with a Cisco Aironet 340 Access Point. I have a bunch of 340 and 350 PCI & PC Card clients and one new 802.11 a/b/g client. This network is connected to the Internet via a Linksys BEFSR41 router & a cable modem. Th...

Hello to all: I have a AP1200 to which upgraded the IOS to Release 12.2.13-JA3, but was a problem and the update was not completed correctly, after that the AP remains blocked, the status LED always is green and is no way to connect itself to the AP,...

Help,I am attempting to locate a tool or rule of thumb for estimating the max throughput for a point-to-multipoint (3 non-root bridges) configuration. The aironet 1410 wireless bridges will be used. The max distance between the links is 1.5 miles. Th...

Has Anyone added the security patch to WLSE 2.5 yet? If so, how did you do it?

Hell we have many 1230's deployed in the fieldand I have a few that are experiancing a wierd issue.Simply put the Radio Interface 802.11b stop transmitting and recieving from clients at random,sometimes 2 or 3 times a day, sometimes only once a week....

Is there a way to export or recover your current WEP key from the AP's config, or from a .pro that was created with the Aironet Client Utility?

Hi,I'm hoping somebody can help me here. I am currently setting up a wireless bridged back-up network for one of our customers, and it seems to be doing some odd things.I have a Root bridge, that has an SSID the same as the seven Non-Root Bridges, al...