Wireless

Cisco Aironet 350 802.11b card working with 3rd party wireless DSL router (LinkSys, D-link or Netgear) to establish VPN tunnel via Cisco VPN client. VPN session always get drop when using 9600 MHz cordless phone. Is there something between Cisco Airo...

I am seeing a high rate of CRC errors on the recieve end of my root radio for a point to point connection. What could cause the high CRCs the other end has low CRCs.

I am trying to upgrade [AP350, 12.03T] with AP350-Cisco-IOS-Upgrade-Image-v2.img (12.2(13)JA1 )When I try to save the Firmware-Job I get the following messageImageAP350-Cisco-IOS-Upgrade-Image-v2.img (12.2(13)JA1 ) Not recognized And in BOLD RED...

Can anyone help me in configuring the Cisco Aironet 350 adapter to talk to the Netgear WGT624 wireless router? I've been at it for a couple of hours now and can not nail it down. Thanks Yes, I have the client software installed as this is the same ca...

Folks, I am having some issues with my Cisco aironet 1200 access point, would appreciate if someone could help me out.1) Link shows that i am connected at 11MBs, i have a 802.11G radio in my access point, why not 54MB, i am the only one conn...

does LEAP limited for only Cisco products (Wireless Cards & Access Points)? what if i have Non-Cisco Card, does LEAP work?

When I use an AP1100 or AP1200 with the 802.11g module and all clients have a 802.11g client adapter I got 54Mbit. Now when I insert in this existing network one 802.11b client (eg. WGB350 or Client Adapter) what about the other 802.11g clients. Does...

Hi all,I have upgraded some of our AP350 to the IOS Image 12.2(13)JA1 with the Cisco Conversion Tool.Now I would like to change the configs via WLSE 2.5, which tells me that it doesn't support this image.Has anybody the same problem or maybe a soluti...

Can I upgrade my Release 1.3 to Release 2.5. If yes.how do I got about it,Tanks

Trying to upgrade IOS on AP1200 from 12.2.11 to 12.2.13JA1 using WLSE. The job just keeps running and you have to ultimately kill the job to stop it. Please help!

I tried to discover 3550-Switche with our Cisco WLSE V2.5. Two 3550 devices working fine (V12.2.(8)EA1)+(V12.2.(9)EA1). Other 3550 devices with V12.2.(13)EA1 didn't respond. I don't know why. (same config) -I checked the SNMP-connection with the WLSE...

Hi, If the 1400 root bridge is configured for EAP, what are the options for EAP authentication methods to be configured on a Microsoft IAS radius server in order to authenticate the 1400 non-root bridge?LEAP is out since it is not supported on IAS,...

Hello,I'm deploying a wireless network where the APs are Cisco 1200 and the terminals are Intermec. I have configured the AP to work using MIC, PPK and Broadcast Key Rotation, but I'm not sure if all these enhacements are being applied during the com...

Hi,i try to get the number of users on aironet 1100 with the latest version 12.2(13)JA1.snmpwalk with oid .1.3.6.1.4.1.522.3.6.1.1.1.11.2the device did'nt answer to this string.can you help me 10x