Wireless

Now the Cisco IOS being available for AP's which one is better for the AP's?Thanks.

Hello, I have configured my AP with 3 VLANs (VLAN1=Native, VLAN4=Prod, VLAN5=Guest). The bvi1 int has an ip address of 172.16.0.81. however when I tried to connect to the AP via webbrowser or try to ping the ap (172.16.0.81) from it will loose connec...

I am running WLSE ver 2.5 with 1200 series access points, IOS ver 12.2(13)JA. I have the WLSE set to monitor associated clients and continue to recieve the fault AP is in Overloaded state (4294967295 associated clients. This only happens with a few A...

Hi,I was curious if the PEAP users of the Cisco forum (MS or Cisco PEAP) could state their login process, the amount of time it takes to authenticate, and if the error logs below are normal.I have set up both the MS and Cisco versions and the Cisco i...

We have an installation with approx 18 access points in a fairly small warehouse. The Cisco 1200 AP’s are running firmware version 12.01 T1.We have 3 VLAN’s at this facility and the cisco switches are doing trunking while the AP’s are doing 802.1Q ...

I'm going to be setting up Cisco 1220's in a warehouse. I was wondering if there was a "rule of thumb" to use. We always use 100mw for power and 11Mbps. Previous warehouses, we've gone by the 50,000 sq ft rule, and we've had no problems. Is there...

I have a Win 2000 server running IAS with a Cisco 1200 running 12.2(13)JA1 IOS software. I am using Win XP with SP1. I am using PEAPI can get everything to work fine using an Avaya gold card. When I switch to my Cisco 350 card, the pc associates to m...

I need create in our campus network wlan network using cisco AP 350 i need authenticate all our users on aur ACS server. Is it possible??? Do you have experience with this????

Hello.I need to install a PCI wireless card on a PC, but I need to install the antenna 3 mt away from it.How can I do this?Can I use an AIR-CAB020LL-R (20 ft LOW LOSS CABLE ASSEMBLY W/RP-TNC CONNECTORS) to install the antenna remotely? And do I need ...

Hello,I need to install an AP Cisco 1100 as repeater of an AP350 but does not result me.It is possible?,If I configure an AP1100 as Root and another AP1100 as repeater they function correctly, but if I configure the AP350 as Root and the AP1100 as Re...

We use LEAP with transparent user settings for user authenticatication against win2000 Active Directory. When laptop users login, the Cisco ACS automatically takes their username and password back to AD for authentication. The AD policy requires us...

Is there some way to limit or force the quantity of concurrent connected users to each AP1200 or any other model?If not, please explain alternatives.

HI i want to upgrade 60 aps from 12.2.11 to the latest 12.2.12JA1 in the release note i saw that i ahve to shut down the radio interface.http://www.cisco.com/en/US/products/hw/wireless/ps4570/prod_release_note09186a00801d725d.html#68570i have tested ...