Wireless

Hello, I've deployed a WLAN using a root AP and some Repeaters (AP352). I've configured the the Ciscos to validate clients by MAC address, using a RADIUS. Is there any way to centralize authentication in the root AP. Now, I have to configure my radiu...

Just looking for a bit of advice and hoping I've not missed something really...I have just installed 3 Aironet Access Points, a 350 and two 1200's. I have used this sort of mixed model setup before without a problem. I have set 'Broadcast' SSID to NO...

After updating the IOS to 12.2(11)JA the Boot Loader remains the same 12.2(8)JADo you have any ideas how I can make the Boot Loader have the same version 12.2(11)JA or this is not important?Thanks,

I'm trying to use the ACU site survey tools to map out some locations. I'm using a 350 and ACU 6 connecting to a 1220 802.11b AP. I've got a PIII 450 IBM laptop running XP. My AP is set for 1 = basic, 2 = basic, 5.5 = yes, 11 = yesMy problem -- no ma...

We have several APs in an environment. Users are associating with APs that are not the closest AP. What determines which AP a user will associate to? And why will that user stay connected to an AP that he is getting "poor" to no signal strength, inst...

Hi all,Recently whenever i ping my 10KM bridge to bridge connection, i get very high treturn time. The normal time I used to get was <10ms. It is now common to get 2100ms return time. This will continue for some minutes before it drops back to <10ms ...

I'm wondering what the best settings are for a 1200 Access point when used in a Hot Spot application. Specifically, I'm wanting to maximize compatiblity with the broadest range of 3rd party client cards.Has anyone had real-world experience testing 12...

Hi,Cisco made the acces-list available but they did not explained it in the manual. I need to disable a filter and I don't know how since the web browser interface is not working because of the filter.Do you know how the access-list works for the AP ...

Is the "multiple SSID" feature of the 1200 access points compatible with non-cisco 802.11 cards? I put in multiple SSIDs on a 1200 AP with a &b radios, and my Cisco 351 card was able to associate just fine to any of the SSIDs. However, with a netgear...

I would like to know if freeradius implementation version 0.8-2 supports LEAP. If yes, does anybody know of any documents to configure this on freeradius?Thaks

Greetings,I was wondering if anyone had some ideas for configuring additional security on a 7200 synchronous serial interface other than access-lists when dialing in with a modem. I would like to know if its possible to be asked for a username and pa...

Under investigating the wireless architecture for large hospital, but I don¡¦t have much knowledge about medical environments. Can anyone give some suggestion or provide information about anything should be specially taken care in this critical case....

I have installed 4 BR350 bridges at a customer site. All works well except for two of the bridges. These bridges keep going down every 5 to 10 miniutes with an event in the log "Lost Authentication with Parent" on the parent bridge I get a message th...

I have created a vlan comprised of the switch ports that attach a wireless access point to the Ethernet net. Laptops, (most of them using an Aironet 350 NIC) can get a DHCP address from the server but Symbol RF units cannot. I have temporarily resolv...

Hi all,I took a 1220 that was running Vxworks and upgraded to IOS last night. The upgrade went fine, however afterwards I wasn't able to authenticate to our IAS server using PEAP with MD5. I did an erase start and tried everything from scratch (also ...