Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Hi allWe have about 100 locations (1000 AP´s) connected over a FrameRelay WAN. Now we want implement LEAP. Question: We have 2 redundant ACS for Authentication in the headquarter. Is it a possible solution to take these ACS ??
What's the history behind the 802.11b channels allowed in Japan? I have read where the IEEE Std 802.11b-1999 standard said only channel 14 was allowed. I have also seen several documents; Cisco’s included, that all 14 channels are allowed. I understa...
I have a problem with 340AP while I use appletalk protocol. but it works fine when I use my Mac Laptops with TCP/IP connection. do I need to make any changes in the the AP configuration so that it allow the Appletalk protocol...if any one has an answ...
From the "Cisco Aironet Wireless LAN Client Adapters Configuration Guide for Windows", it indicates that Windows 2000 can support host-based EAP with the "Service Pack 3 or greater and the Windows 2000 Wireless 802.1X hot fix". However, I cannot find...
as I connect three AP 1200, in which mode must be each one of them,ssid can be the same one or I must change it?
It seems there is a problem between the ethernet port of a 350 series wireless bridge and the ethernet port of a 4005 3com switch. Symptoms:when you just connect them one to another, they work just fine, but after a while, maybe 4 hours, maybe 1 or 2...
Is there a way to configure the Client or ACS server to allow for the changing of an expired password?It appears that if a LEAP enabled client attempts to autheticate to an Access Point via ACS that is configured to point to an NT active directory fo...
Various literature indicates that the 5Ghz Antenna is a 6dbi patch and 2dbi dipole. Can anyone please describe in detail the features / funtions of the antenna. (What physical position does the antenna need to be for what function?)
Hello!My task is very simple.I want Birdge 350 Series to forward ONLY IP protocol. And drop others.I follow the Ethertype Filters link, then define new FILTERwith Default Disposition set to block.Then I add a new Specisal Case with IP protocol (0x080...
We are going to implement a wireless LAN, but still don't know which standard to use. What are the "+" and "-" of those standards ???
Good afternoon. Help me, please, if anyone knows how.I've got three devices AIR-BR350-A-K9 and they are working.AP (their antennas) are in distance of some meters from each other and they are directed to the three different districts of the town.The ...
Does anyone know where one can download the "RFC1155-SMI" and "RFC1212" mibs for access point 352? ThanksFanny
The Status light (middle) have this behaviour: steady, then a small blink, steady, a smmal blink, and so on. But the devices are working and the communication is OK.I've checked the normal blink when I shut down one bridge, but when I turn it on agai...
I cannot ping the AP from the Lan-Side , and from the Wireless Side i cannot connect to the Lan (The Ethernet Indicator Blinking red three to five Times on Reboot). In the Setup over Serial-Port the fec0 Interface shows many Transmit Errors.What can ...
I have a 350 Access point running 12.0T software with a laptop running ACU 5.05 and most up to date drivers. I am getting problems when I am setting up vlans that correspond to ssid. The native vlan appears to work all the time, however when I change...
