Wireless

Anyone out there noticed any issues with HP G4 Chromebooks and MR46 APs?We have newer Lenovos and New HP Chromebooks that do not exhibit constant connection drops.Observer behavior:Chromebook disconnects and reconnects to same AP every few seconds.So...

Hi Guys, we are installing new Cisco AP with external antenas of model C9120AXE-E. Anyone have document which help me to see pictorial view of best antena positions?

hello, I forgot my pi server backup password. Is there any way to check?

Hi there, We have had to configure an IW3702 in the middle of the Root AP and Client AP eg: RootAP <----------> RepeaterAP <---------> Client AP From the repeater I have an established connection between both RootAP and ClientAP, however neither the ...

Hi All,I'm working on a group of IE2000s connected by multimode fiber. I have 10 instant's and configured the same way and 9/10 are functioning properly, but that one won't communicate on either fiber port. I've checked the transceiver detail of both...

Can I use AP iw3702 on ATEX Ex Zone 1 or 2 classifed areas? if not, which one is recommended?

Hi, I have an 1800s running legacy software version. When I try to claim it with a 2.x DNA Center I receive an error, stating the CiscoSensorProvisioning SSID is not supported with the current sw version of the sensor. This is expected, as the DNAC d...

Hello AllLooking for help on troubleshooting access point 9130X. I have DHCP server/scope running on Cisco 9200 ( switch 1 ) and can see it is handing IP address to AP but I am not able to ping/reach Access point. I have switchport setup to access po...

After a pentest I got this low vulnerability on some access points:CVE-2008-5161Description: The SSH server is configured to support Cipher Block Chaining (CBC)encryption.  This may allow an attacker to recover the plaintext messagefrom the ciphertex...

hi, i have just ordered  C9124AXE-ROQ & C9124AXI-ROW.  need guidance how to configure these APs in Mesh?  Wireless controller C9800-L-F.

hello,i get the problem my AIR-AP1832I-C-K9 , how can this problem solve please help me. please tell me details .thanks you. (RNAQ-C7) # resetresetting ...U-Boot 2012.07 (btldr release 38) (Oct 29 2019 - 06:39:45)This product contains some software l...

according to high availability deployment guide 17.3 for C9800 WLCs there are 2 options for Redundancy: via RP Connecting a C9800 wireless controller HA pair to upstream switches Prior to 17.1 following topologies were supported in terms of upstream ...