Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Because I have being getting many troubles with denalli ios version I have upgraded to fuji 16.9. Now I can not find commands to configure wireless controller. Can anyone send me a documentation, please. Thanks in advance. Rosa
I have a cisco aironet 1832i preloaded with Mobility Express Software version 8.5.140.This access point was previously working as the primary controller up until recently when the users complained of no internet connection. Upon checking the boot pro...
Hi, I have a Aironet AP1262N's that I am trying to see if it can support 802.11u. Specifically I want to find out if they can be configured with a hotspot profile with its access network type set to "chargeable-public-network". There are supposed ...
Hi Allhow does channel assignment work when doing flex and bridge mode? does it use the same radio and channel for both the backhaul bridge connection as it does to serve the clients but just separates the airtime between the clients and backhaul?che...
Can someone explain the difference between the software versions for C9800-CL WLC's & what is required for integration with DNAC?We have one with version 8.5.151.0, but i see versions called Gibraltar 16 & Amsterdam 17, are these for different operat...
Hi All We need to change the default managment vlan on a deployment of 1832i and 1852i For now i only have a 1852 connected and all vlans are configured Van 1 mgmt Vlan 402 clients I have the switch ports configured as trunk and native is the mgmt vl...
Hello, we are using CCX v1 for our RFID tags. we are able to see our tags in DNA spaces. we are sending sensor-related information in the vendor-specific field so that we can use them in our server. we get tag updates in below mannertag sends CCX bea...
I'm studying for my CCNP so I bought this WLC 2504 but it seems not to have Service interface configuration only the management interface. My understanding the management interface is used for the capwap. What type of interface should I configure ...
Hello Is there any good advice when upgrading an SSO pair of 8510's from 8.3 to 8.5 ? There are a couple of thousand APs in Flex mode - but the Flex Groups contain APs from multiple sites - hence I am doubting that the FlexAP Upgrade will be of mu...
Hi, I'm toying with a AIR-CAP3702E-E-K9 (autonomous Version 15.3(3)JJ1), and i want to make sure its using the long external antennas (orange band), I think it might be but is there any way i can check, please. Any assistance is greatly appreciated. ...
2ND TIME THIS HAS BEEN REPORTED AS SPAM, PLEASE TELL ME WHAT THE PROBLEM IS. Hi, I have an AIR-CAP3702E-E-K9 (autonomous Version 15.3(3)JJ1), and i want to make sure its using the long external antennas (orange band), I think it might be but is there...
Hi, I'm toying with a AIR-CAP3702E-E-K9 (autonomous Version 15.3(3)JJ1), and i want to make sure its using the long external antennas (orange band), I think it might be but is there any way i can check, please. My Config below; Building configuration...
Hi, so here is the situationMy meraki status on dashboard is "grey" = "unreachable" but when I check the LED indicator it is Blue sometimes Green. Is there some configuration that I'm missing? Also due to the increasing number of users can AP automat...
Hi, I have a 2504 with x3 AP's connected, x2 are 2700 series and as I understand it support mesh, so wanted to configure them to improve WiFi coverage in a spot I can't get wired connections in. I have configured both the RAP and the MAP as such both...
Hi AllI start configuring cisco 3800 accesspoint i already configure the first one. first i install ME software on the access point and now it act as a controller what is the next step inorder to join the other APs in the controller. Do i have to ins...
