I'm trying to get a 12000-SIP-401 engine 5 LC running in a 120008 chassis running IOS XR.
I'm getting these kinds of error messages:
%PLATFORM-FABRIC_CTRL-2-ERR_REPORT : Action: Resetting FIA ASIC on Slot 4 Reason: LOS at FIA Error on Card 4. Pos...
Hi,
i´m searching for the right OID for temperature at a asr9k.
I used th entitysensor MIB for a snmp walk, but i don´t find any matching values with the output (admin show environment temperature) on the command line.
The output in entSensorValue is...
We can't use MC-LAG due to access equipment limitations.
We don't want to use MSTAG because...
Redundancy is not a switch you flip on or off - it takes a lot of work and coordination.
Redundancy introduces additional 'what ifs' - you create many more...
Hi experts.
My doubt is so simple, I have a topology like this:
PC1----7600-1----7600-2----ASR9k1----PC2
Considerations:
- Both PCs are in a vrf A, because of that 7600-1 and ASR9k1 are PEs
- ASR9k1 and 7600-1 have a BGP session with VPNv4 and IPv4...
Hi all, I need to know if there is the possibility for the ASR9K with IOS-XR 5.3.3 to support the IPSLA Udp Jitter using the VRF, in particular for the Responder.
Could anyone help me?
Thanks in advance.
Marco Cagiola.
Dears,
We have using an ASR9K for 3 years. Commit and update used to take 1 or 2 sec. Suddenly it started to take 20 sec to finish.
CPU is around 9 %. Any idea how to approach this problem ?
Regards
Hi,
if have to upgrade a RSP4 from XR 4.3.2 to XR 5.3.2. Disk0: shows only 1.6 GB so I first thought that I could repartition it to 1.9 GB. As it seems to me the repartitioning should have been done during a previous upgrade, I can't find a SMU in 4....
Has anybody seen this behavior in XR5.3.2 too? I have not found any listed bug so far. Any DDTS available?
XR 5.3.2
RP/0/RSP0/CPU0:ASR9K-1#sh bgp vrf PRO_MGMT ipv4 unicast nei 10.41.251.6 advertised-routes
Thu Jan 7 02:15:49.996 UTC
% Neighbor n...
Hi all,
i would like to check if it is worth enabling "maximum-path ibgp XY". I have ASR9K running 5.3.3.
I would like to check how many prefixes meet all criteria for ibgp multipath. (I assume there should not be that many, because it depends on top...
Has anyone else experienced issues with the ASR9001 and IRL links not coming up when trying to commission nvEdge.
The control plane is fine;
RP/0/RSP0/CPU0:asr9001s-prod-01(admin)#sh dsc Sun Feb 28 09:35:52.857 UTC------------------------------------...
Hi everyone!
I dont know how to configure autosaving config file to ftp server on daily basis. Can anyone help me? My company uses ASR 9000 version 5.1.3
Thanks
HI CommunityI have radius config to accepts any connection to avoid attach PPPOE Session. How to config redirect url to:"http://xxxx.com/Response.aspx?username=%U" when subscriber use expire username. I need to sent username to aspx (username=%U) and...
hello，
I want to increasing the cache size.But while committing the config ,it's failed.
This is the output.
RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC#conf t Mon Feb 22 09:33:49.668 beijing RP/0/RP0/CPU0:SN-XA-ZJB-CR-2.IDC(config)#flow? flow RP/0/RP0/CP...
