The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hi, I'm working with a client to deploy 802.1x on Cisco 9200 access switches. All but one switch are working successfully. However, one device is not accepting the command "authentication order dot1x mab" and returns the message that the command is d...
in advanced deployment mode. here I see the device as indoor. it also says that I can change it from the default AP profile. but the default AP profile covers all antennas. I can't predict how my indoor devices will be affected when I make this chang...
Hi, I have configured two ISPs (WAN1, WAN2). VPN with anyconnect was already working for both ISPs. Today when doing final tests, VPN for ISP1 on WAN1 is not working anymore. ISP2 on WAN2 still works. ASA log shows: 1 Starting SSL handshake with clie...
Hello Community, I recently deployed active/standby set up for single router dual circuit where one circuit has slower speed and was meant to be a backup line incase primary failed. I made following two config changes to make it work and was curious...
Hi. First post ever so I might be doing this wrong....I am to add a new /24 network in an existing Network Device list.This due to the existing IP range is for a temporary setup still running in a temporary location and I am now setting up the perman...
So we have old 5508 controllers in our environment which has access points and clients on them. We also have 9800 WLC in our environment on the same switches. We are planning to move the access points and clients between the two controllers and wante...
Hi all We try to add network device groups to all Location with python headers = {'content-type' : 'application/json', 'Accept':'application/jsson'} payload="{"NetworkDeviceGroup" : {"name" : "Location#All Locations#AA","ngdtype" : "Location","desc...
I would appreciate any help! I am working on "Getting Started with Cisco Packet Tracer. Deploying devices in the packet Tracer but keeps getting this error message.
Hi, Customer want to buy around 28 Cisco Catalyst Switches with Cisco DNA Essentials license. My question is: If we want to install Cisco Catalyst management Center and add all of those 28 switches into Management center and use virtual appliance do ...
Hi All,Currently setup CME with FXO connected to telco, call is able in and outbound, but when calling in caller-id showing unknow number on phone.Router version 15.4please find attach for configuration and log when inbound call.
I was looking through the downloads section and noticed that IOS-XE 17.12.4 is now suggested for install on the 9407R Supervisor Engine-1.I also noticed that in the software on chassis section it only suggests 17.9.5. Anyone know why this is or what ...
I am trying to pull log files from my SMA. I am logged in with the admin account and when I https://SMA_Name/system_administration/log_list?log_type=system_logs I get the message "Access Denied. You do not have the necessary privileges to view or edi...
Hi, We are migrating Cisco ASA5555 to Cisco Firepower 2100 ASA, is it possible to transfer the license that we have on the ASA5555 to the new Cisco Firepower 2100 ASA? if it is, can you please share the Steps and Procedure on how we can do that. Than...