Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1999510members
1360010discussions

Community Activity

PROBLEM WITH LOCAL HTTP SERVER

My local server does not work (I cannot go to the web page of this server from the 33.33.33.0 network), although I can from the 192 168.1.0 network, but there I use a gre tunnel, maybe problem in nat, in the middle I use ospf and announce other netwo...

Resolved! Split Traffic between 2 Firewall from my Core Switch C3850

The goal i want to achieve here based on from the diagram below:i want user1 - 192.168.20.x to pass FG-FW01 192.168.1.1i want user 2 -192.168.50.x to pass FG-FW02 192.168.1.111currently the routing is going to FG-FW01 with static ip route 0.0.0.0 0.0...

HeraldSison_0-1729088974829.png

How to correct mosfet fault

%LINK-3-UPDOWN: Interface GigabitEthernet1/0/9, changed state to down* %PM-4-ERR_DISABLE: inline-power error detected on Gi1/0/9, putting Gi1/0/9 in err-disable state* %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/9: PD removed* %ILPOWER-3-CONTROLLER_P...

device profiling on WLC 9800 running IOS-XE

Hey everyone,Is there a way to update the OUI database in the WLC running IOS-XE.  I think there was a way with AirOS, but I don't see it in IOS-XEWhat I want to do us upload the updated OUI database from https://standards-oui.ieee.org/oui/oui.txt so...

Alex-Pr by Level 1
  • 109 Views
  • 5 replies
  • 0 Helpful votes

Low disk space updating 9200L stack switches

I have a 9200L-48P-4X switch stacked with a 9200L-48P-10G. When attempting to update to version 17.09.05, I encounter a "low disk" error on the 1G switch, while the 10G switch does not have this issue. The update image copies to the switch, but when ...

ezejazz by Level 1
  • 87 Views
  • 4 replies
  • 0 Helpful votes

Creating One-Way-Routing between to linked Networks

Hello colleagues,I am NOT a Cisco-certified specialist but rather focused more on IT forensics and regular client/server technologies.I have created a link using a routed port between an SX350X and a CBS350. The CBS350 has the subnet 10.10.10.0/24, a...

dk-one by Level 1
  • 80 Views
  • 4 replies
  • 0 Helpful votes

Duo Deployment to protect Gsuite emails

Hello everyone,I was looking for information on how to deploy Duo for a customer using G Suite emails. This customer doesn't have a Windows server or any other authentication source. Is it possible to deploy the Duo MFA solution?Thanks!

jcuni by Level 1
  • 61 Views
  • 3 replies
  • 0 Helpful votes