Application Networking

Dear All,Can per user get management access in per context on ACE module?For instance, user A can manage just context A, user B can manage just context B on attachment file.Thanks.

Hi,Does the ACE 4710 supports ssl-offloading of FTPS Application ?If so please provide me with the configurations.

Dear all, I’m trying to find out whether you could restrict access to a single VIP to only 2 different source ip addresses? Our situation looks like: ACE module setup in one-armed design, using NAT.About 200 vips are defined. I know you could restric...

I have a router that has been configured to show ip flow top-talker information.  I recently added a WAAS to this site that is using WCCP redirection.  The 'top-talkers' output on the router still works - but shows source/destination of the router an...

I'm trying to reload the software using the recovery CD on one of my WAVE-574s in the LAB. I'm unable to use the recovery CD. I tried every option and I still can't load it. Any ideas? I already tried swapping out the hard drive with another one in t...

Hello,on one WAE in my network I receive heaps of error messages like the followingError getting the security descriptor of nv02521.w2\swl$\SWL_Tools\PDX_TOOL\PDX_Tool.exe, client 172.16.82.111.can anybody help out here what it means ? As far as I ha...

currently we have access lists that allow any traffic to the interfaceshowever a new design has come up about setting up a new VIP and only allowing 6 hosts to that VIPwe still want to keep the any any on the interface-butwould I do this using class ...

Hello Guys,Customer is looking to load balance Dot1x traffic going to many Cisco ACS servers. Concern is ACS server do not maintain any states so need to make sure that all the requests from a particular ip going to multple ports(1812 and 1813) are g...

Users are complaining of slow performance when accessing database files using MS Access across the WAN. I've simulated this in my lab and I do notice when navigating through the different tables it is a little bit slow and crashes a lot when closing ...

Hi all,I did a "ft switchover all" on the primary unit in order to reboot it afterwards, and I get the above message.Group ID 2 does not switch over.All contexts in the primary are active and in the secondary standby_hot before I attempt the switchov...

Hi,I have the following questions about the VIP locations.From the configurations guides, you configure a VLAN X  for clients (where the traffic to be balanced arrives), and VLAN Y for  servers (where the real servers are) - for router mode these are...