Call Control

Resolved! Problem with my pin script and transfering calls

Good afternoon,I have a script to ask for pin number and match it to a list of allowed pin numbers. The script gets the active Leg, and then plays a sound on that $legID, asking to "enter the pin number followed by the pound sign"... everything wor...

lineOpen Failing

I have a TAPI application running in production that restarts every morning and opens a number of lines to monitor. This had been running fine up until a couple days ago and now lineOpen() is failing for every line with the error LINEERR_RESOURCEUNAV...

Resolved! TermConnActiveEv doesn´t fire when hold call

I have this scenario:2 phones (A and B) from the same user with same DN in both phonesWhen receive a call, both ring and answer in phone A and hold call on A.Until CUCM 7.1.5 after receive CallCtlTermConnHeldEv for phone A I receive TermConnActiveEv...

problem about extension mobility invoked by interface

Dear Team,I met a problem that when I using the interface to set the extension mobility on ipphone, when I using the call manager(10.0.1-10000-22) is ok. when I change to using the call manager of 10.0.1-13010-1,It can not be set on ipphone by interf...

Whole call recording (Revisited)

About four years ago I posted an inquiry on the (now expired) Cisco Dev Forum asking about Cisco VXML platform's support for "whole call recording" (WCR), and the answer I got then from the gateway team was "No, WCR is NOT supported by the Cisco VXML...

Resolved! Modified param for next call...

I have been working the last time with some cvp application and tcls....As you now standalone cvp works with a tcl on gw...My idea now its create a new Inicial tcl.. where I will check the ani number and if that ani number its my cellphone and after ...

Resolved! transfer connect/handoff to SIP Provider using tcl on Dial-peer

I have a customer who has AT&T as their SIP Provider. I'm looking for some guidance on how I should build a tcl script to allow a transfer connect (connect a PSTN caller on the SIP Gateway to a non-network number, blind transfer, and terminating the ...

How to find CUCM URL from a CEC User Id

Hi Team, I am from DFT Team , we are building Click To Video solution from browser. We were able to establish video call between Browser and phone.Steps we followed to make video call:1. User will logged into our application using CEC Id and pass...

Resolved! RTP properties of a call after conference failure

Hello, I have an application which uses several CTI ports to transfer calls to one main CTI port which handles conferencing them all together. In the event of a conference failure, I would like to inform the user that a failure has occured in the f...

Promote from silent monitoring to Barge

Hi,Is there any API available to promote from silent monitoring to Barge?If not what are the ways to promote silent monitoring to Barge feature.Regards,Umesh

Resolved! Leg States

Hi everyone , I am working with a CVP implementation.. which has a survivability tcl script so when CPV is unreachable (ex branch is on SRST) .. I could execute a custom TCL script...I have made a basic tcl that plays greating message .. check out of...

Changing Calling Paerty Display Name in a Call

Hi,Is there any API to change calling party display name in a call? If not supported by JTAPI then is there any other Cisco API which support this.Thanks,Umesh

cisco recommended router/switch ios version

Being new to Communities I posted the following question in 'Developer'. I got a reply referring me to here. I think it odd I get an answer here, but hey one never knows until one tries...I have been doing some tcl/expect scripting and came across a ...

sip to sip gateway

Hi Friends,I have just preparing for cvoice and I have made two sip gateways on gns3 connected with loopback and VM-Net. Xlite phone registered on both gateway seperately.When i make calls each other it shows media not implemented. The configuration ...

how to read TSI value with TCL on inbound fax to IOS GW

hallo, I have configured a fax to email on my IOS GW. All works, but one customer sends us a fax without ANI identification. We can see, that their fax machine have filled the fax number acording to RFC 822 as originator TSI. This number is not part...

Intro to Ansible	Good Documentation	The Great Selenelion
>> View previously featured conversations <<

Call Control

Forum Posts

Resolved! Problem with my pin script and transfering calls

lineOpen Failing

Resolved! TermConnActiveEv doesn´t fire when hold call

problem about extension mobility invoked by interface

Whole call recording (Revisited)

Resolved! Modified param for next call...

Resolved! transfer connect/handoff to SIP Provider using tcl on Dial-peer

How to find CUCM URL from a CEC User Id

Resolved! RTP properties of a call after conference failure

Promote from silent monitoring to Barge

Resolved! Leg States

Changing Calling Paerty Display Name in a Call

cisco recommended router/switch ios version

sip to sip gateway

how to read TSI value with TCL on inbound fax to IOS GW

Can CURRI be used for Post-Answer Treatment?

Update the callers display.

JTAPI application - Implementation

Jabber Web SDK

How to detect call direction in Cisco JTAPI (transfer/conference)?

Retreiving Call data using JTAPI

JTPAI Identify the Original Connection

Creating Call Park Simulation App

Unity Connection 12.5 | CUPI API issue

IP-Phone Custom Rx Stream: Merging It Into Call's Tx Stream