We are piloting a project to implement Cisco Jabber in our environment. A small team has been tasked to implement and test Cisco Jabber. I a network admin have been tasked to make sure Jabber can communicate properly through the firewall and any othe...
Forum Posts
So we have upgraded DNA to 2.3.3.3. The API is getting better, and we are close to actually automating the whole process of migrating a vanilla switched site to a SDA fabric. However theres one API-call that i cant get to work. The "Add border"-call ...
Currently, we are running the Datacenter with ACI technology( Spine and Leaf) and campus Network with DNA Technology(Border, Intermediate, DNA Edge Fabric switches, WLAN, Firewall for Guest internet, and Access point).Internet and MPLS link is connec...
Hi All,We are trying to upgrade the Stack Switch (Cisco 9300) IOS from 16.12.5b to 17.3.5 via DNAC which is getting failed in pre-check. DNAC is running with Version 2.2.2.8 .Can some one help us to know why the failure is happening and how to resolv...
Dear Team, we have used the DNA Center feature called Disaster Recovery. We have register Main Site Successfully. then we went through recovery site to register with main site. We have faced an issue with an error message "No Installed Keys could d...
Hi, I am totally new to Cisco DNAC but not to Python and configuring network devices via APIs (previously worked with juniper and nokia), I've been tasked with adding certain vlan config to certain interfaces on certain Cisco switches (9X00) under th...
I'm attempting to follow this in a lab environment. DNA 2.2.3.5Cisco DNA Center Network Automation with Template Programmer API – Part 1 - Cisco BlogsI have python 3.10 and the dna api installed and can see all my templates in DNA center.As per the e...
Hi All, I have imported several floor maps into DNAC and scaled accordingly, my question is how do I now align multiple floors together? E.G. ground floor > first floor > second floor etc. In the past usually align by way of lift shaft or services d...
Hello DNA fans I see in the DNA Center Compatibility Matrix that some UCS servers are supported. I assume this means the CIMC can be polled via SNMP? Can I also send SNMP traps to DNAC and have it do something useful with it? Cisco tells our custom...
Hi there, I'm reading what appears to me to be conflicting information regarding the DNAC data retention. In some docs, it says that the time range configured on the DNAC Health dashboards "can be any time frame up to 14 days ago. Data older than 14 ...
Or is DNA center extremely buggy? And I have no way to resolve the simplest of things. I have to open a TAC for each case and most often that has turned into restarting a bunch of random services I know nothing about. My current issue is inventory vi...
Hello all. Here is my situation:I need to edit the Primary and Secondary Managed Locations in DNA Center for a pair of N+1 Controllers. However, to do so, the only way to achieve this is by Provisioning the Controllers with their respective locations...
Hi all, While executing the lan automation to onboard access switches. On one of the switches i am facing a weird issue which i dont have a clue to why DNAC is doing that.During the lan automation process i am seing the following log message on the s...
Hi All Does anyone know what permissions control access to command runner & automated troubleshooting in DNAC?We're trying to setup a role so people can run the automated troubleshooting steps but they fail when you attempt to run them. Currently we ...
We have a few Cisco 9500 switches Cisco IOS XE Software, Version 16.11.01 with the Cisco DNA advantage license that is expiring soon.Can anyone confirm that once the Cisco DNA Advantage license expires I will still have the full usability of the Swit...
