Due to a compliance requirement, I need some database information from the CMX appliance - AIR-MSE-3365-K9. Information we need: "Total Tables: Total fields:" Appliance information: AIR-MSE-3365-K9 CMX version image: 10.3.1-35 Operating System: Lin...
Forum Posts
Will pushing a firmware update to the active switch also apply the firmware to the standby-hot? or does the firmware need to pushed to both switches in the stack?
this issue was fixed by applying the below steps:Authentication issue was causing switches to be not discovered properly. This was resolved by correctly configuring SNMP.PM data was still not being collected properly because ES indices were taking up...
Hi Team,I am copying a binary from a Windows Version 10 (source) to my Cisco Switch (target). Here is the output//Doing this from the Cisco sidetest-c99-e0541-fs9148a# copy scp: bootflash:Enter source filename: C:\VCAN\Cisco\9148S\m9100-s5ek9-kicksta...
Resolved! Reload switch Catalyst 4500
Hello,I have une simple question. Is it possible to define a date and hour for reload a switch Catalyst 4500 ? Thank you
Hi All, have 3 different models of cisco switches I need to upgrade the IOS but I can't use the TFTP server. please share if you have other ways to do this. Thanks,Yared
hello experts,i have made an integration between ise and fmc , made pxgrid integration which is successfully runningfmc can only retrieve active directory users to use in access control policies , but if i created an internal user in ise , it can't b...
Hi All, How can I best format my POST request for CompressedClientLog? CompressedClientLog—Post Compressed Log to Finesse - Finesse - Document - Cisco DevNetCompressedClientLog—Post Compressed Log to Finesse var data = new FormData(); var logObj = '<...
Recently installed this ASA Version on firewalls :asa9-12-4-50-smp-k8.binThat version seems to only accept signed asdm image ( asdm-7181-152.bin ). When trying to start the asdm.jnlp file I get the following error -> see attachment cisco_asdm_proble...
Hello everyone, i'm so confuse. i've read many document but always confused, need your help. i've two 3850 switch on stack and i need to use BGP when i look i've that i must upgrade ip base to ip service. i've receive pdf with information L-3850-RTU=...
Hallo,I would like to use GNS3 to model some labs. Courtesy of my company, I have access to the Cisco sofware images. However, whenever I upload the .bin files to GNS3, I get the 'image not valid' message. Are the images from CML any different/specia...
Regarding the EOS deadlines on our two SW versions present on the N9K, we find contradictions on the Cisco site:- EOS version NXOS 9.2 (x):Link https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/eos-eol-notice-c51-7...
Hello.I am having a problem with RTRM, specifically I can not edit the "Start Time" for Real Time Data (Under Voice/Video->Session Trace Log View->Real Time Data). Not sure if this is a Java issue or something else... thanks for any help. Here is a...
I have setup CallN to work with our CUCM installation. I have install the CallN and TAPI application and driver on a server. Everything works fine, except reporting the correct number of the caller and the recipient. I have used the prescribed method...
I am attempting to subscribe to /ios-events-ios-xe-oper:system-reboot-issued and /ios-events-ios-xe-oper:system-reboot-complete on-change with the following on a c8000v running ios 17.5.1: config ttelemetry ietf subscription 2605encoding encode-kvgpb...
