Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We have 4×E1 (PRI) line with 4 pilot number. Each E1 associated with one Pilot number and have 30 channel that mean 30 concurrent calls can be make . So in total we have 4xE1 then 120 concurrent call (incoming and outgoing together). PRI_01_(038316xx...
Hi Amazing Community,I have a request from a team which have request a similar setup as the below image;To summarise the requirement is;- 1 Agent/Admin Staff on a phone to answer the call for a team- The phone should have multiple lines, but they wan...
Cisco IP phone unable to dial (787) area code number. CUCM version 12.0.1.787 is PR area codeUser tried to dial 81-and then the complete number.Please advise
Current active load setting on phone is 12-0-1sr1-1. Is there a way to update this to 12-5-SR3 or newer? Current setting won't work with our IP service and was told we need as least the 5 or newer. Thanks.
I recently purchased an old model of Cisco unified ip phone. Model CP - 6961. I powered it on using POE and i can also see the phone with the same ip range on my network scanner. Query is, like any other regular VoIP phone, should the Cisco 6961 phon...
In the past i was able to login into my cisco phone online and update it so I can have the base phone ring as well as ring to another line. It appears that i can no longer do this. I don't want to call forward all calls but I want the incoming call...
Hello,LAB testing with a VG204 and getting no ring out of the fxs port.In debug mode: call is there but throwing: SIP/2.0 484 Address Incompletehomebox router provides SIP account with internal number 624, this account is working on laptop using a so...
The connection as below:- CUCM version 12.0.1 >>> VG H323 2900 >>> PRI E1 PSTN We using G711ulaw codecInbound calls working fine but All outbound Calls disconnected after answering call. This the output of debug isdn q931 outbound calls. 001180: Ma...
Registered 192 to an Avaya CM 8.1 system and when testing inbound faxing, the carrier is sending ptime=20 and the ATA is acknowledging with 30. Need to know what settings if any I can adjust in the ATA to send the correct size packet.
I am currently using Grandstream HT802 for 2 SIP (3rd party) phone lines. Will the account info that I currently use work with this firmware for the 7965g? I do not want to use asterisk if possible also. Also not sure what to do with pumpkin... no in...
So we’re making some changes on our voip infrastructure. We’re upgrading from a 2921 to a 4321 at our main location. We also have another 4321 as a failover at a separate buildingThe engineer I’m working with upgraded the main 4321 to v17. Since it’s...
Hi,guys I meet a problem about Cisco phone series. the lab show it's Cisco CP9865-C-3PCC-K9.But I look through the all Cisco collaboration page but find no useful information. Now I speculate it's engineering sample with unknown series (called 9800 ...
Hi We have ISR4331-V/K9 router with 10 cisco ip phones connected to it, it was working fine without any issues the suddenly phones stopped working, my question is do we have to purchase a license to make phones work with standard features? Thanks
https://community.cisco.com/t5/ip-telephony-and-phones/unable-to-perform-factory-reset-on-8945-via-button-procedure/td-p/2595785https://community.cisco.com/t5/ip-telephony-and-phones/error-403-directory-listing-denied/td-p/4504195Dear folkBought used...
Hello,We're running Jabber for Windows 14.1.2 and want to know if its possible to change the default opening position of the E911 alert window from the top left, to instead be centered in the middle of the screen?Also is it possible to resize the ale...
