Hello genius minds. I have a network of about 50 sites connected via MPLs. We have a default- route in the network for Internet access. The company has decided to remove this default route and use proxy for Internet access for security purposes...
Hi experts,I am just starting out with CCIE(R & S and SP, dont know which one I'm gonna give, I love both). I am just trying to come up with a lab design that I will be constructing based on my mistakes and experiences. I'd like you all to help me ou...
I need to influence the default-network (0.0.0.0/0) being sent to my remote sites.:Network: : HQ1-----HQ2 | |provider CLOUD |Remote-sites (~200+ remote sites):HQ1 and HQ2 sends the default-network to the provider cloudHQ1, HQ2 and ALL r...
Hi All,Wondering what are below highlighted value as they are used for route preferences. pe401c6506#sh ip bgp vpnv4 vrf DATA 10.18.0.0/16BGP routing table entry for 10.254.0.253:120:10.18.0.0/16, version 157413Paths: (2 available, best #2, table DAT...
Is there any way to provide multipoint layer2 services using 3600x metro switches. I work on a wireless network with 6524s on the backbone and 3600s as our service handoff. So we are wanting to provide T-1 replacement to our customer, but would lik...
Hi,I have searched around a bit about route leaking between GRT and VRF. I have found many examples that work well in VRFlite situations where you can add static routes over interfaces that are part of a VRF. However I did not find an example that he...
Hi to all, i'm trying to configure nat between vrf.I have a network with multiple vrf and a common vrf where there are some service shared among them.I've ip overlapping issue, so i'm trying to use nat aware vrf.The shared service is on a vrf also.I ...
My ASR usually dectects this below log:%ASR1000_OIR-6-ONLINECARD: Card (rp) online in slot R0%REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_FOUND(4))%REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby in...
Hello All,we are current running an MPLS network from service provider 1 across our Branch office network. we need moe redudnancy and are looking to add another MPLS cloud from service provider 2. How would we integrate service provider 2 onto the sa...
I try to configure CoPP on 7600 sup7203BXL,when I apply on Control-Plane, then the MPLS TE tunnel goes down.Can anyone help ? Cisco RSVP is port 3455 ?I do not have any packet match port 3455.Extended IP access list cp-class-default-in 10 permit ...
Hi
I was going through sham-link RFC & i found some thing intresting & but confusing.
I had simulated the LAB for sham link & checked that we won't require redistribution between MPBGP & OSPF when we are using sham-link just we need to configure os...
Hello i have a strange (in my mind) problem.I have the design outlayed below in pdf document. When i only have mpls links up everything is as it should. But as soon as i take up one of the routed links that isnt an xconnect i get a loop.Dosent matter...
Hi Experts,I've been struggling with this setup and couldn't get it to work.The idea basically is to establish ebgp mpls peering between two different AS. There shouldn't be any global table entries.I am able to get as far as the vpnv4 vrf summ show...
