MPLS

Hi,I’m having problem with one of my customer running OSPF through our MPLS cloud. They claim that they having high latency and certain application cannot run when connected through our MPLS cloud. At first the stability of the network was unstable b...

Good morning I'm writing you to ask a question that I don't find an answer, the question is below:If between a MPLS path there's a hop that is not set to understand MPLS, what happens?Any information that you can send me are welcomed.Best Regardsserc...

Trying to get Tacacs+ running on a 3550EMI switch running 12.1(22)EA3 (latest release), without much success due to wht appears to be lack of support for for Per VRF AAA/TACACS+ on the box.Checked elsewhere and looks like this feature is only availab...

Hello, my name is Petr Akimov employed as engineer by ZAO KORTEK - Russia, Moscow. I had success configuring EoMPLS in the following method (VLAN mode):7600-1 (equipped with WS-SUP720-3BXL and WS-X6724-SFP):interface Loopback0 ip address 10.14.40.2 2...

Anybody familiar with this log message ? Is this a cisco IOS bug ?Apr 20 11:47:05.585 PHT: %TFIB-2-NULLADJ: ----------------TAGREWRITE------------------------------------------------------Apr 20 11:47:05.585 PHT: %TFIB-2-NULLADJ: intag 0x4A, outtag 0...

Hi,I cant find any decent documentation on this and unfortunately loaned Erics book to someone else (damn). Anyway. Is there any decent documentation explaining how you can have two tunnels to the same destination but use different paths and loadba...

I have an issue I wish to resolve. I’ve got one customer router with 2 links, coming from me to them and need to put "ip pim sparse-dense mode" in place on each interface But when I turn this on for each interface it over whelms the customer and the ...

Hy Situation: Enterprise MPLS Network. Some different VRF's are routed together over the MSFC of a 6500.In my opinion it is no possible to have the same IP Adresses in each VRF. Is this true?Second question.Does anyone have experience in the situatio...

Hello,I'd like to know how to provision the rttmonCtrlAdminTag variable (RTTMON MIB) with a Cisco Command Line. Any idea?Thanks.-Y.

My company is switching from a traditional site-to-site IPSec VPN to a Service Provider MPLS solution. At our main site, we will be bringing in a DS3 to connect to the SP network via ATM. We will be channelizing 20Mb for MPLS traffic and 20Mb for Int...

hi,Im new to MPLS and searching for a management tool which will allow us configuring, monitoring our MPLS network. :::I know the Cisco's Tunnel Builder and other Ciscos tools.thanks

Hi engineersIs it possible to redistribute routes from a vrf instance into the global routing table?I need this scenario for a migration from a normal Layer 3 core to MPLS. My intention would be to redistribute the vrf routes into global routing tabl...

HyWe have an MPLS Network for an Enterprise Customer with around 20 PE Routers. We decided to implement a Route Reflector for the BGP Peers. Could anybody recommend me an adequate Router? We thought about 7200 NPE-400, is this oversized? cheerspatric...

I have a straight IP network with EIGRP as a IGP. I want to run MPLS so we can offer VPN services.I have deployed MBGP already and everything is fine. Now I want to configure MPLS.I have selected a link to one of our POP sites, which has various rout...